User manual RYOBI 100W ROTARY TOOL KIT ERK24100VK

[. . . ] Failure to comply can result in accidents involving fire, electric shock or serious personal injury. Save owners manual and review frequently for continuing safe operation and instructing others who may use this tool. The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. [. . . ] DO NOT OPERATE THIS TOOL WHILE UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR ANY MEDICATION. THE APPLIANCE IS NOT INTENDED FOR USE BY YOUNG OR INFIRM PERSONS WITHOUT SUPERVISION. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Due to continued product refinement policy, product features and specifications can and will change without notice. Check current features and specifications with your retailer. FEATURES 2 3 4 1 5 6 7 1. Cloth Wheel with 3. 2mm 2pcs 2. 4mm 1pce Metal Flange 25. 4 x 3. 2mm (16 Layers) 1pce 14. Aluminum Oxide Grinding Wheel Grinding Wheel 15. 9 x 9. 5mm 9. 5 x 12. 7mm Grit 120 2pcs Grit 120 2pcs 26. Aluminum Oxide Parabolic Wheel Grinding Wheel 9. 5 x 19mm 19 x 3. 2mm Grit 120 2pcs Grit 220 6pcs 28. Silicon Carbide Grinding Wheel Grinding Wheel 10. 3 x 3. 2mm 19 x 3. 2mm Grit 120 2pcs Grit 180 6pcs ACCESSORIES LIST 31. To operate the tool, push switch trigger to "I" or "II" positions. While pushing switch trigger to "II" position, it is the highest speed. The running speed cannot be controlled by "+" or "-" buttons. Depress and hold the spindle lock pin on the top of the tool to stop the rotation of the motor. Turn the collet nut until the spindle lock pin engages the hole in the shaft. While pushing switch trigger to "I" position, you can control the desired speed by adjusting the number shown in the LCD display when pushing "+" or "-" buttons. (The number ranges between 6 and 32) 4. [. . . ] To assure safety and reliability, all repairs should performed by an Authorised Service Centre. MAINTENANCE 1. The tool must be switched off and unplugged before making any maintenance of the accessories. The air-vent of the tool should be cleaned regularly to avoid overheating of the motor which is caused by the block of the air-vent. RYOBI TECHNOLOGIES AUSTRALIA PTY. [. . . ]