User manual RYOBI 1000W ANGLE GRINDER 100MM EAG1006

[. . . ] Failure to comply can result in accidents involving fire, electric shock or serious personal injury. Save owners manual and review frequently for continuing safe operation and instructing others who may use this tool. The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. [. . . ] DO NOT OPERA TE THIS TOOL WHILE UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR ANY MEDICATION. THE APPLIANCE IS NOT INTENDED FOR USE BYYOUNG OR INFIRM PERSONS WITHOUT SUPERVISION. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Due to continued product refinement policy, product features and specifications can and will change without notice. Check current features and specifications with your retailer. On/ Off Switch Carbon Brush Cap Carbon Brush Cap Spindle Lock Spindle Lock Button Button On/Off Switch Auxiliary Handle Auxiliary Handle Grinding Wheel Wheel Grinding Wheel Guard Wheel Guard Wheel Clamp Nut DO NOT STAND IN FRONT OF A NEWLY FITTED GRINDING WHEEL. Grinding wheel must be securely attached as described in the operation manual before connecting the grinder to a power supply. Before use, test for normal operation with grinding wheel facing in a safe direction, i. e. Fissures and cracks can cause a grinding wheel to shatter resulting in possible serious injury. One hand on the auxiliary handle and the other on body of the grinder, with the thumb or finger touching the on/of f switch (see below) 4. Never place the grinder on the floor or other surface while it is running. Use only approved grinding wheels and only use the normal grinding surface. Make sure a tool is only connected to the voltage marked on its name plate. Never start a tool when its rotating component is in contact with the workpiece. Do not touch the sanding disc or work piece immediately after operation. Always place the thumb of finger on the switch when operating so that the grinder can be switched off quickly in case of emergency. Grinding Wheel Grinding Clamp Nut INSTALLATION OF GRINDING WHEEL To assemble the grinding wheel, attach the disc flange, grinding wheel and the clamp nut to the spindle shaft. [. . . ] Guarantee Conditions This guarantee only applies provided that the Product has been used in accordance with the manufacturer's recommendations under normal use and reasonable care (in the opinion of the Company) and such guarantee does not cover damage, malfunction or failure resulting from misuse, neglect, abuse, or used for a purpose for which it was not designed or is not suited and no repairs, alterations or modifications have been attempted by other than an Authorised Service Agent. This guarantee will not apply if the tool is damaged by accident or if repairs arise from normal wear and tear. The Company accepts no additional liability pursuant to this guarantee for the costs of travelling or transportation of the Product or parts to and from the service dealer or agent - such costs are not included in this guarantee. [. . . ]