User manual RYOBI 0131030330

[. . . ] OPERATOR'S MANUAL DADO THROAT PLATE 0131030330-35 (FOR USE WITH THE BTS20 TABLE SAW) Your Dado Throat Plate has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual. Thank you for buying a Ryobi tool. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Rules for Safe Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Make sure the switch is off when reconnecting the saw to a power supply. If you loan someone this product, also loan these instructions. READ ALL INSTRUCTIONS KNOW YOUR ACCESSORY. Learn the product's applications and limitations as well as the specific potential hazards related to this product. Everyday eyeglasses have only impactresistant lenses; they are NOT safety glasses. 2 SYMBOLS Important: Some of the following symbols may be used on this tool. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V A Hz W min Volts Amperes Hertz Watt Minutes Alternating Current --- Voltage Current Frequency (cycles per second) Power Time Type of current Type or a characteristic of current Rotational speed, at no load Double-insulated construction Revolutions, strokes, surface speed, orbits etc. , per minute Precautions that involve your safety The manual contains special messages to bring attention to potential safety concerns and machine damage as well as helpful operating and servicing information. Please read all the information carefully to avoid injury and machine damage. Always wear safety goggles or safety glasses with side shields and a full face shield when operating this product. Direct Current No Load Speed Class II Construction n0 . . . /min Per Minute Safety Alert Read The Operator's Manual Eye Protection Wet Conditions Alert Do not expose to rain or use in damp locations. SAVE THESE INSTRUCTIONS 3 UNPACKING INFORMATION Remove the loose parts from the box. Inspect the dado throat plate carefully to make sure no breakage or damage occurred during shipping. If the dado throat plate is damaged, please call 1-800-525-2579 for assistance. LOOSE PARTS LIST Dado throat plate 10-24 x 1/2 in. flat head screw (1) TOOLS NEEDED Phillips head screwdriver WARNING: If any parts are missing, replace the missing parts before assembling the kit. [. . . ] For the location of the authorized service center nearest you, please call 1-800-525-2579 or visit us online at www. ryobitools. com. When ordering parts, always give the model number: MODEL NUMBER 1428 Pearman Dairy Road Anderson SC 29625 Post Office Box 1207 Anderson SC 29622-1207 Phone 1-800-525-2579 www. ryobitools. com 983000-368 09-03 RYOBI TECHNOLOGIES INC. 6 [. . . ]