User manual ROLLS RS80

[. . . ] This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Digital Quartz AM/FM Tuner RS80 OWNERS MANUAL Rolls Corporation Salt Lake City, UT 6/06 INTRODUCTION Thank you for your purchase of the Rolls RS80 Quartz PLL Synthesized AM/FM Tuner. This unit has been carefully designed and assembled to provide years of reliable AM/FM reception, along with superior audio quality. Please read this manual carefully as it contains important information regarding the proper setup and operaton of the RS80. [. . . ] · PTY Search: Once the RDS/PTY mode has been selected, pressing this button searches through all frequencies to find a station matching the selected Program Type. · RDS Display: Displays the current RDS information (if available) from the current station. Pressing this button repeatedly scrolls through the info such as Station ID, Station Frequency, Artist and Song Title, Time, Clock, and Text. Pressing this button repeatedly scrolls through the list of Program Types. LCD DISPLAY The RS80 LCD display shows which band (AM or FM) is currently selected, and if the unit is receiving RDS information. · The Channel indicator displays the channel or PRESET number that has been selected. · The Frequency indicator shows the current frequency setting of either the FM or AM station selected. · When an RDS station is being received, and the information is set to be displayed, this LCD display will show that information. It will need to be in the "line of sight" in order for the RS80 Remote to operate properly. · Stereo LED: Indicates a stereo station is being recieved and the RS80 is NOT in MONO mode. · Modulation LEDs: Indicates the current selected station's signal strength. · Headphone Level: Adjusts the signal level of the Headphone Out. · Headphone Out: 1/4" Tip-Ring-Sleeve stereo jack for connection to stereo headpones. · Power Switch: Applies power to the RS80. 2 DESCRIPTION CONT REAR PANEL · AC: Three connector iec power cord. · Power Select Switch: Selects between 115 Volt (US), and 230 (Europe) AC power voltages. This switch MUST be in the proper setting before the RS80 is turned on. · Right and Left Outputs: Balanced XLR and unbalanced RCA outputs. [. . . ] RDS (Radio Display System) FUNCTION RDS is a data stream of information sent out by certain FM radio stations along with the actual program. To utilize this feature, you must first be tuned to a station that carries this RDS signal; the display will indicate "RDS". Not all stations that carry the RDS data - carry all functions of RDS (ie; some do not carry the "clock" or "text" data). [. . . ]