User manual ROLLS RM64OLD
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLLS RM64OLD. We hope that this ROLLS RM64OLD user guide will be useful to you.
 |
Manual abstract: user guide ROLLS RM64OLD
Detailed instructions for use are in the User's Guide.
[. . . ] MIXMAX6 RM64 Owners Manual RM64 MIXMAX6 The ROLLS RM64 MIXMAX6 is a breakthrough in size/performance in an audio mixer, it is a full function console 6 channel mixer in a single space 19" rack chassis. It is intended for sound reinforcement, studio, choir, and other applications where high channel to size ratio is desirable. [. . . ] FX SEND - This is the channel signal with tone and volume, summed together and sent to the FX SEND jack on the rear panel to be input to reverb, chorus, etc. FX RETURN - this is the return from any effects used with the FX SEND signal and is used to adjust the master effects level. MASTER VOLUME, RIGHT - LEFT - are for adjusting the main stereo output level for the unit and set the overall level for everything except the monitor signal. Rear Panel Jacks CHANNEL MIC & LINE - are the inputs for each channel and are mixed, both may be used at once, but of course they will have the same volume controls. PHANTOM POWER - are the switches for turning on the microphone power for the XLR inputs, and are numbered for the channel they are assigned to. AUX BUSS IN - is a TRS stereo input to the main mix buss and may be used as an auxiliary stereo input of for joining two RM64's together. MONITOR OUT - goes to an auxiliary amplifier or monitoring system for the sound room, performers, etc. . RIGHT OUT, LEFT OUT - are the main outputs to the EQ, power amp, etc. .
Using Phantom Power Phantom power is a means of powering condenser microphones through the microphone cable. The RM64 has individually switchable phantom power for each of it's 6 channels through the XLR connectors. The DIP switches on the rear of the unit are for switching this power on and off. [. . . ] 20 Hz - 20K Hz XLR with switched 12VDC phantom power 1/4 phone line in 1/4" main balanced +17 dB max 1/4" monitor +17 dB max 1/4" FX send 60 dB mike 26 dB line 55 dB 20 dB treb, bass cut/boost, 400 Hz center 106 dB <. 003 % <. 003 %
Monitor Tone control Max S/N Ratio THD IMD (SMPTE) CMRR 52 dB Power 120 VAC 50-60 Hz 15 VA Weight 7 LBS. (48 X 4. 5 X 17 CM)
LIMITED WARRANTY TO VIEW THE ROLLS WARRANTY - SEE THE WARRANTY PAGE ON OUR WEBSITE; www. rolls. com Rolls Corporation, 4711 Holladay Blvd, Salt Lake City UT 84117 9340
SCHEMATIC [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLLS RM64OLD
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLLS RM64OLD will begin.