User manual ROLLS MX152

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLLS MX152. We hope that this ROLLS MX152 user guide will be useful to you.


ROLLS MX152 : Download the complete user guide (1677 Ko)

You may also download the following manuals related to this product:

   ROLLS MX152 DATASHEET (1383 ko)

Manual abstract: user guide ROLLS MX152

Detailed instructions for use are in the User's Guide.

[. . . ] SCHEMATIC MX152 MixMate Mic/Line Mixer Input Impedance: Mic: Source: Max Input Level: Mic: Source: Connectors: Phantom Power: Max Gain: Mic: Source: Tone Controls: Noise Floor: S/N Ratio: Priority Attenuation: Power: Size: Weight: SPECIFICATIONS ROLLS CORPORATION SALT LAKE CITY, UTAH 6/04 600 Ohms XLR balanced 22K Ohms RCA -14 dBV Mic level Max 24 dBV 2: XLR, 8: Stereo RCA +12 VDC 60 dBV 26 dBV +/-12 dB 100 Hz Bass +/-12 dB 11kHz Treble - 80 dB 96 dB 60 dB 12VAC / 600 mA 5. 4" x 1. 7" x 5. 5" 2 lbs Owners Manual INTRODUCTION Thank your for your purchase of the Rolls MX152 MixMate. The MX152 is a two microphone, three source stereo mixer designed for restaurants, schools, churches, clubs etc. [. . . ] If a paging microphone is being used, connect it to Mic Input 1 so it may be used with the Talk Over function. Connect source signals such as CD players, cassette players or video players to the RCA Source Inputs. If a jukebox is being connected, and you want its signal to mute the other source signals, connect it to Source input 3. Output Connect a stereo RCA cabe to the main Output jack, and to an amplifier or the next device in your signal chain. Shown here is a connection example for the MX152. DESCRIPTION FRONT PANEL Mic 1, 2 Adjust the level of signal from the corresponding Mic Input. 2: TONE 1, 2 Adjusts the frequency content of the microphone signal in the channel. When 2: the control is turned counter-clockwise, the high frequencies are cut, when the control is turned clockwise, the low frequencies are cut. Treble: Adjusts the high frequencies of the Source 1 and 2 signals only. pwr: pwr LED indicating power is applied to the MX152 and the unit is on. OPERATION DIP SWITCH SETTINGS (From left to right) · The Mono/Stereo switch selects the output mode. When the switch is down, the stereo signals are mixed to mono and sent to both the Right and Left Main output jacks. · Source 3 Priority: when in the down position, Source 1, and 2 will be "ducked" or muted by the signals at Source 3. With a jukebox connected to Source input 3, and the Talkover switch 2 on (down), the other Source input signals such as background music, will be muted and only the jukebox will be heard. [. . . ] DIP SWITCH: Contains the small switches for engaging Mic 1, 2 phantom power, Source 3 Stereo or Mono, the priority (Talk Over) functions, and the Mono/Stereo select. MICROPHONE ONE and TWO: Balanced XLR inputs to be connected to dynamic or condenser microphones. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLLS MX152




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLLS MX152 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.