User manual ROLLS MP80

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLLS MP80. We hope that this ROLLS MP80 user guide will be useful to you.


ROLLS MP80 : Download the complete user guide (22 Ko)

Manual abstract: user guide ROLLS MP80

Detailed instructions for use are in the User's Guide.

[. . . ] LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. [. . . ] This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. MP80 MIDI CONTROLLER OWNERS MANUAL INTRODUCTION Thank you for purchasing the ROLLS MP80 Midi Pedal, it is designed to provide lasting value and usefulness. MIDI provides standardization from which many manufacturers can create products to interface with each other. It has a lot in common with the RS232 for computer data except MIDI is better thought out and is more of a true standard. MIDI is supported for all popular computers, and hardware and software support are increasing daily. Also since it has such wide support, MIDI is now being used for some non musical applications. The ROLLS MP80 is a controller for sending MIDI program change information on any of the 16 MIDI channels. The 2 digit display shows the bank and patch numbers and does not necessarily equal the MIDI program number being accessed. The left digit is the bank # and the right is the patch # (or preset #). The exact MIDI program # can be found by the formula (bank #+1) X (patch #+1)=MIDI program #. The MIDI channel # is set by dip switches on the front of the unit, switches 1 - 4 off is MIDI channel 1, switches 5 & 6 are not used at this time. The UP and DOWN buttons select the desired bank (0 - 9) but MIDI information is only sent when a patch button (0 through 7) is pressed. INSTALLATION Apply power 7 to 15 volts AC or DC to the power jack on the front of the MP80 or it may be phantom powered through the MIDI jack. While there is no standard for MIDI phantom power there is a convention of pin 1 as ground and pin 3 as hot, the MP80 may be phantom powered by 7 to 25 VDC @ 50 ma. Connect the MIDI OUT on the MP80 with a standard MIDI cable to the MIDI IN on the unit to be controlled. [. . . ] 7 to 15 VAC/VDC 50 ma 2. 0 mm cntr pin DC jack Phantom Power 7 to 25 VDC 50 ma pin 1 neg, pin 3 positive Display 2 digit red . 56" high efficiency Switches 10 high rel. life Output MIDI program change with channel, 5 pin DIN Chassis 20 guage black steel [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLLS MP80




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLLS MP80 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.