User manual ROLAND V-1600HD

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLAND V-1600HD. We hope that this ROLAND V-1600HD user guide will be useful to you.


ROLAND V-1600HD : Download the complete user guide (7838 Ko)

You may also download the following manuals related to this product:

   ROLAND V-1600HD (6322 ko)
   ROLAND V-1600HD annexe 4 (2170 ko)
   ROLAND V-1600HD annexe 3 (708 ko)
   ROLAND V-1600HD annexe 2 (149 ko)
   ROLAND V-1600HD annexe 1 (98 ko)
   ROLAND V-1600HD REFERENCE GUIDE (2091 ko)

Manual abstract: user guide ROLAND V-1600HD

Detailed instructions for use are in the User's Guide.

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2010 ROLAND CORPORATION All rights reserved. [. . . ] Set the transition time. Turn the TRANSITION [TIME] dial to set the transition time. The time is displayed by the TRANSITION indicator. * By default, the transition time is set at 1. 0 second. When the unit is started for the first time, the indicator displays [1. 0]. On the second and subsequent startup, the value of the MEMORY Bank 1/Button 1 setting is displayed. 47). fig. time-dial. eps 28 Switching the Video in the DSK Mode (PGM/PST) 3. Select the transition effect. Use the buttons in the WIPE PATTERN section to choose a transition effect. fig. wipe-pattern. eps · WIPE 1 through 4 A wipe transition is made according to the wipe pattern shown by the icon above the button. · FAM (Full-Additive Mix) A mix transition is made with the luminance levels of the two pictures remaining unchanged. · NAM (Non-Additive Mix) During the transition, the picture is displayed progressively, starting with the areas of highest luminance level. · MIX The transition is made progressively as the two pictures are mixed. · CUT The transition is made instantly, with no transition effect applied. * You can use the menus to change the setting for the transition effect. 47). When PinP or Key is activated, MIX is automatically selected even if you have selected WIPE in the WIPE PATTERN section. 4. Select the channel you want to output next (standby). Use the [PST/EFFECT] buttons to choose the channel you want to display next. Pressing the button makes it light up green. * When the display mode for the monitor is set at [PVW], the video on the selected channel is displayed on the V-1600HD's monitor. fig. select-PST. eps 5. Switch the output video. Preview the standby video, and press the [TAKE] button when you want to make the transition. The picture changes and the PGM button lights up red. * When the display mode for the monitor is [PVW], the monitor display does not change. Selecting another channel to display next on standby makes the monitor display the newly selected standby channel. fig. TAKE-button. eps 29 Switching the Video in the DSK Mode (PGM/PST) Switching the Picture Using the Video Fader Using the [TAKE] button makes the transitions occur linearly. To stop partway through and show a mix of two channels, perform the mix transition manually using the video fader. 1. Move the video fader all the way. Before you carry out the transition operation, move the video fader all the way toward either the front or the back. 2. Select the transition effect. Use the buttons in the WIPE PATTERN section to choose a transition effect. When you have selected [CUT] in the WIPE PATTERN section, the transition takes place instantly at the video fader's center position. If you want to show a double exposure, choose a transition other than [CUT]. 3. Select the channel you want to output next (standby). Use the [PST/EFFECT] buttons to choose the channel you want to display next. 4. [. . . ] 13 T TAKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 29 TAKE Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 TALLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 24 TRANSITION Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND V-1600HD




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND V-1600HD will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.