User manual ROLAND TD-10K

[. . . ] The manual should be saved and kept on hand as a convenient reference. Copyright © 1997 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING - When using electric products, basic precautions should always be followed, including the following: 1. [. . . ] If it is set to "Off, " this function will be disabled. Procedure 1. Use [INC/DEC] or the VALUE dial to set the tempo. Parameters TEMPO: 20­260 s Setting the time signature and click interval Procedure 1. Use [CURSOR] to move the cursor to the parameter that you wish to set. * It is not possible to change the time signature of the click while a pattern is playing back. The click corresponds to the time signature of the pattern. Parameters Time Signature: Numerator = 0­13 (number of beats per measure), Denominator = 2, 4, 8, 16 (basic note value) Interval: 1/2 (half note), 3/8 (dotted quarter note), 1/4 (quarter note), 1/8 (eighth note), 1/12 (12th note), 1/16 (16th note) 99 Chapter 10 Chapter 9 Chapter 8 Chapter 7 Chapter 6 Chapter 5 Chapter 4 Chapter 3 This function is a great performance tool!For example if you specify "Tap" for a pattern which contains a melody line and assign this pattern to a pad, you can play the notes of the melody in order each time you strike the pad. You can set the "Reset Time" so that the pattern will automatically return to the beginning if that time interval elapses without that pad being hit again. For example, you can play a bass line with your kick drum and the two sounds will be perfectly "tight. " Click settings s Click on/off and volume settings When you press [CLICK], the click will be turned on/off. To adjust the volume, move the [GROUP FADERS] slider [CLICK]. s Setting the tempo While pattern playback is halted, you can use the click as a metronome. But if a different pattern is selected, the tempo will change to the tempo specified for that pattern. Chapter 2 Chapter 1 Chapter 6. Sequencer s Selecting the click sound You have a choice of sixteen sounds including a human voice! s Adjusting the pan (stereo location) You can set the pan position of the click. Loop 1, Loop 2, Loop 4, Loop 8: This determines the length of the section you are recording, and 1, 2, 4 or 8 measure sections will repeat. Any previously recorded data for all Parts will be erased. s Using a count-in You can set a "count-in" (1 or 2 measures) to be heard before playback or recording. Procedure 1. If you want a count-in for playback, select "PLAY. " For recording, select "REC. " 3. Use [INC/DEC] or the VALUE dial to make the setting. Parameters PLAY: OFF, 1 meas, 2 meas REC: OFF, 1 meas, 2 meas OFF: Playback/recording will begin without a count-in. Set the tempo fig. 07-10 s Start recording the moment that you strike a pad Procedure 1. This function starts the recording process the instant you strike a pad. Procedure 1. The "REC STANDBY" page will appear and you are in record-standby mode as the click starts to play. Use [INC/DEC] or the VALUE dial to turn the setting "ON. " 7. In record-standby mode (the "REC STANDBY" page), press [PLAY]. When you finish recording, press [STOP]. Usage In record-standby mode, recording starts the instant you strike a pad. 102 Chapter 6. Sequencer s Correcting timing as you record (Quantize) Quantize is a function that corrects inaccuracies of timing while you record. [. . . ] Kontor Norge Lilleakerveien 2 Postboks 95 Lilleaker N-0216 Oslo NORWAY TEL: 2273 0074 JORDAN AMMAN Trading Agency 245 Prince Mohammad St. , Amman 1118, JORDAN TEL: (06) 464-1200 REUNION Maison FO - YAM Marcel 25 Rue Jules Hermann, Chaudron - BP79 97 491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429 TAIWAN ROLAND TAIWAN ENTERPRISE CO. , LTD. Room 5, 9fl. TEL: (02) 2561 3339 URUGUAY Todo Musica S. A. Francisco Acuna de Figueroa 1771 C. P. : 11. 800 Montevideo, URUGUAY TEL: (02) 924-2335 POLAND P. PL-03664 Warszawa POLAND TEL: (022) 679 44 19 KUWAIT Easa Husain Al Yousifi Est. Abdullah Salem Street, Safat, KUWAIT TEL: 243-6399 SOUTH AFRICA That Other Music Shop (PTY) Ltd. 11 Melle St. , Braamfontein, Johannesbourg, SOUTH AFRICA P. O. Box 32918, Braamfontein 2017 Johannesbourg, SOUTH AFRICA TEL: (011) 403 4105 THAILAND Theera Music Co. , Ltd. 330 Verng NakornKasem, Soi 2, Bangkok 10100, THAILAND TEL: (02) 2248821 VENEZUELA Musicland Digital C. A. Av. [. . . ]