User manual ROLAND SR-JV80-01

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLAND SR-JV80-01. We hope that this ROLAND SR-JV80-01 user guide will be useful to you.


ROLAND SR-JV80-01 : Download the complete user guide (166 Ko)

You may also download the following manuals related to this product:

   ROLAND SR-JV80-01 (278 ko)

Manual abstract: user guide ROLAND SR-JV80-01

Detailed instructions for use are in the User's Guide.

[. . . ] (Initial value is ON) * The resulting effect is determined by System Exclusive messages. r Portamento Time (Controller number 5) Status 2nd byte 3rd byte BnH 05H vvH n = MIDI channel number vv = Portamento Time : 0H-FH (ch. 1-ch. 16) : 00H-7FH (0-127), Initial value = 00H (0) 3rd byte vvH 00H : 0H-FH (ch. 1-ch. 16) : 00H-7FH (0-127) : 00H-7FH (0-127) n = MIDI channel number kk = note number vv = note off velocity * This adjusts the rate of pitch change when Portamento is ON or when using the Portamento Control. r Data Entry (Controller number 6, 38) Status 2nd byte 3rd byte BnH 06H mmH BnH 26H llH n = MIDI channel number : 0H-FH (ch. 1-ch. 16) mm, ll = the value of the parameter specified by RPN/NRPN mm = MSB, ll = LSB * For Drum Parts, these messages are received when Rx. NOTE OFF = ON for each Instrument. q Note on Status 2nd byte 9nH kkH 3rd byte vvH : 0H-FH (ch. 1-ch. 16) : 00H-7FH (0-127) : 01H-7FH (1-127) n = MIDI channel number kk = note number vv = note on velocity r Volume (Controller number 7) Status 2nd byte 3rd byte BnH 07H vvH n = MIDI channel number vv = Volume : 0H-FH (ch. 1-ch. 16) : 00H-7FH (0-127), Initial Value = 64H (100) * Not received when Rx. NOTE MESSAGE = OFF. [. . . ] We suggest that normally you use PORT A for BLOCK01-0F, and PORT B for BLOCK101F. (In this case there is no need to change the setting. ) * Refer to page 116 for details of each BLOCK. q Patch parameters r Patch Common parameters In MODE-1 (Single module mode) the VE-GS Pro functions as a single sound source module with 32 Parts. In MODE-2 (Double module mode) it functions as two sound source modules with 16 Parts each. The parameters common to all Parts in each module are called Patch Common parameters. Address(H) 40 00 00 40 00 01# 40 00 02# 40 00 03# Size(H) 00 00 04 Data(H) 0018 - 07E8 Parameter MASTER TUNE Description -100. 0 - +100. 0 [cent] Use nibblized data. Default Value (H) 00 04 00 00 Description 0 [cent] * Refer to section 5. 40 00 04 40 00 05 40 00 06 40 00 7F 00 00 01 00 00 01 00 00 01 00 00 01 00 - 7F 28 - 58 01 - 7F 00 MASTER VOLUME MASTER KEY-SHIFT MASTER PAN MODE SET 0 - 127 (= F0 7F 7F 04 01 00 vv F7 ) -24 - +24 [semitones] -63 (LEFT) - +63 (RIGHT) 00 = GS Reset (Rx. only) 7F 40 40 127 0[semitones] 0 (CENTER) * Refer to "System exclusive messages related to Mode settings" (page 111). 40 01 30 00 00 01 00 - 07 REVERB MACRO 00: Room 1 01: Room 2 02: Room 3 03: Hall 1 04: Hall 2 05: Plate 06: Delay 07: Panning Delay 0-7 0-7 0 - 127 0 - 127 0 - 127 [88] 0 - 127[ms] 04 Hall 2 40 01 31 40 01 32 40 01 33 40 01 34 40 01 35 40 01 37 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 - 07 00 - 07 00 - 7F 00 - 7F 00 - 7F 00 - 7F REVERB CHARACTER REVERB PRE-LPF REVERB LEVEL REVERB TIME REVERB DELAY FEEDBACK REVERB PREDELAY TIME 04 00 40 40 00 00 4 0 64 64 0 0 * REVERB MACRO is a macro parameter that allows global setting of reverb parameters. When you select the reverb type with REVERB MACRO, each reverb parameter will be set to the most suitable value. x. . . BLOCK NUMBER (0 - F), Part 1 Part 2 : Part 9 Part10 Part11 Part12 : Part16 (default MIDIch = 1) (default MIDIch = 2) : (default MIDIch = 9) (default MIDIch =10) (default MIDIch =11) (default MIDIch =12) : (default MIDIch =16) x=1 x=2 : x=9 x=0 x=A x=B : x=F In the following map, the control numbers of the control changes are indicated as CC#. Address(H) 40 1x 00 40 1x 01# 40 1x 02 40 1x 03 40 1x 04 40 1x 05 40 1x 06 40 1x 07 40 1x 08 40 1x 09 40 1x 0A Size(H) 00 00 02 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data(H) 00 - 7F 00 - 7F 00 - 10 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 Parameter TONE NUMBER Rx. VALUE 1 - 128 1 - 16, OFF OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON Default Value (H) 00 00 01 01 01 01 01 01 01 00(01*) Description 0 1 Same as the Part Number ON ON ON ON ON ON ON OFF(ON*) * Rx. NRPN is set to OFF by power-on or by receving "Turn General MIDI System On", and it will be set ON when "GS RESET" is received. 9 VE-GS Pro MIDI Implementation Address(H) 40 1x 0B 40 1x 0C 40 1x 0D 40 1x 0E 40 1x 0F 40 1x 10 40 1x 11 40 1x 12 40 1x 13 Size(H) 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data(H) 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 00 - 01 Parameter Rx. SOFT MONO/POLY MODE Description OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON Mono / Poly (=CC# 126 01 / CC# 127 00) 0 = SINGLE 1 = LIMITED-MULTI 2 = FULL-MULTI Default Value (H) 01 01 01 01 01 01 01 01 01 Description ON ON ON ON ON ON ON ON Poly 40 1x 14 00 00 01 00 - 02 ASSIGN MODE SC-88/Native MAP 01 SC-55 MAP 00 at x=0 01 at x0 LIMITED-MULTI SINGLE (Drum Part) LIMITED-MULTI (Normal Part) * ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i. e. , repeatedly struck notes). This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this. 40 1x 15 00 00 01 00 - 02 USE FOR RHYTHM PART 0 = OFF 1 = MAP1 2 = MAP2 00 at x0 01 at x=0 OFF (Normal Part) MAP1 (Drum Part) * This parameter sets the Drum Map of the Part used as the Drum Part. The VE-GS Pro can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the initial settings, Part10 (MIDI CH=10, x=0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF(0)). Address(H) 40 1x 16 40 1x 17 40 1x 18# Size(H) 00 00 01 00 00 02 Data(H) 28 - 58 08 - F8 Parameter PITCH KEY SHIFT PITCH OFFSET FINE Description -24 - +24 [semitones] -12. 0 - +12. 0 [Hz] Use nibblized data. Default Value (H) 40 08 00 Description 0 [semitones] 0 [Hz] * PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. [. . . ] 40 00 00 | +--------+--------+--------------+-------------------+ | 445. 0 | +19. 56 | 4C 43 (+1603)| 00 04 0C 04 (+196)| | 444. 0 | +15. 67 | 4A 03 (+1283)| 00 04 09 0D (+157)| | 443. 0 | +11. 76 | 47 44 (+ 964)| 00 04 07 06 (+118)| | 442. 0 | + 7. 85 | 45 03 (+ 643)| 00 04 04 0F (+ 79)| | 441. 0 | + 3. 93 | 42 42 (+ 322)| 00 04 02 07 (+ 39)| | 440. 0 | 0 | 40 00 ( 0 )| 00 04 00 00 ( 0)| | 439. 0 | - 3. 94 | 3D 3D (- 323)| 00 03 0D 09 (- 39)| | 438. 0 | - 7. 89 | 3A 7A (- 646)| 00 03 0B 01 (- 79)| +--------+--------+--------------+-------------------+ <Example> Set the tuning of MIDI channel 3 to A4 = 442. 0 Hz Send RPN#1 to MIDI channel 3. B2 (B2) (B2) (B2) (B2) (B2) 65 00 64 01 06 45 26 03 65 7F 64 7F MIDI ch. 3, upper byte of RPN parameter number (MIDI ch. 3) lower byte of RPN parameter number (MIDI ch. 3) upper byte of parameter value (MIDI ch. 3) lower byte of parameter value (MIDI ch. 3) upper byte of RPN parameter number (MIDI ch. 3) lower byte of RPN parameter number : 00H : 01H : 45H : 03H : 7FH : 7FH (1) Exclusive Status, (4) Model ID (GS), (2) ID (Roland), (5) Command ID (DT1), (3) Device ID (17), (6) End of Exclusive Next we calculate the checksum. 40H+01H+30H+02H = 64+1+48+2 = 115 (sum) 115 (sum) ÷ 128 = 0 (quotient) . . . 115 (remainder) checksum = 128 - 115 (remainder) = 13 = 0DH This means that F0 41 10 42 12 40 01 30 02 0D F7 is the message we transmit. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND SR-JV80-01




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND SR-JV80-01 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.