User manual ROLAND SOLJET PRO III USERS MANUAL FOR FIRMWARE INSTALLER

[. . . ] User's Manual for Firmware Installer What is "Firmware Installer"? "Firmware Installer" is an application for installing firmware in user's printer. (2) Preparing the PC Please be confirmed that cable connections between the printer and PC. (3) Starting Firmware Installer Supported Environment We recommend to use this application on operating system such as Microsoft® Windows Vista, Microsoft® Windows XP or Microsoft® Windows 2000. [. . . ] It may takes a few minutes depending on your environment. (6) End of installation Check the Model and Version before clicking "Install" button. If you clicked "Back" button, the dialog goes back to the previous dialog. If you click "Cancel" button, you can exit from Firmware Installer. If the installation is completed, the message below comes up and goes back to the top dialog. User's Manual for Firmware Installer About Message Please check the version of Firmware Installer and version of your printer. During Firmware Installer is executing, another Firmware Installer cannot execute. Please wait until the Firmware Installer finishes. If the application cannot get information from Printer, please check the filled IP address, Main power switch ON, or connection of USB cable. [. . . ] Delete the existing windows driver and install new one. Copyright © 2008 Roland DG Corporation http://www. rolanddg. com If the Sub Power Switch is ON, the Message comes up. [. . . ]