User manual ROLAND S-4000 RCS FOR MAC

[. . . ] 5 Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 S-4000 RCS Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Scene Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving all system settings (Scenes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] * Use RS-232C cable contained as accessory of the S-4000 Digital Snake system to connect with USB/Serial adaptor. If it's necessary to use longer or shorter cable, please purchase RS-232C cable (D-Sub 9pins/male-female/ straight type). It is recommended to use a cable with 15meters length or shorter. * Please refer to page 88 of the S-4000 owner's manual for pin configurations of the RS-232C REMOTE connector on the S-4000S and S-4000H. S-4000S USB cable RS-232C cable USB port USB/Serial adapter (USA-49W, USA-19HS, etc. ) Female Male REMOTE or connector S-4000H USA-28X * In case you are using a USA-28X, RS-422 (mini DIN 8pins Male)/ RS-232C (D-Sub 9pins Male) conversion cable is required. 3 S-4000 RCS User Guide 4. Starting and Shutting down the application Starting the application 1. Double Click [S-4000 RCS] icon. The application will be started and the S-4000 RCS window will appear on the desktop. 2. Select the serial port where the S-4000 system is connected. You have control of the S-4000 system from the S-4000 RCS window of your computer. In case multiple systems are connected 1. Select system "#1"­ "#4" in the "Controller" menu and open the S-4000 RCS window. Select a serial port in each of the S-4000 RCS windows and set which S-4000 system will be controlled from each window. S-4000S Select serial port. S-4000H S-4000S S-4000H S-4000S S-4000H S-4000S S-4000H S-4000 RCS window S-4000 system Shutting down the application 1. Select "Quit S-4000 RCS" from the "S-4000 RCS" menu. The application will quit. 4 5. Names and Functions Menu Menu Bar File Menu New Project Open Project. . . #1­#4 Clear Clip Zoom Minimize Bring All to Front Functions Create a new Project. Display all the windows in front. * For details describing a Scene and Project, please refer to "Saving all system settings (Scenes)" on page 7. S-4000 RCS Window 1 2 3 4 5 6 7 9 8 10 11 12 13 14 15 16 * The basic operation is the same as it is for the S-4000R Remote Controller. Please refer to the "S-4000R Remote Controller" section on page 29 of the S-4000 system owner's manual. Display [Recall] button [Store] button [LOCK] button LOCK Indicator Serial port select box Functions Displays the number of the currently selected memory preset. Recall the settings of the selected memory preset. * Select the memory preset from the [Recall] pull down menu. 3 4 5 6 Save the settings of the selected memory preset. * Select the memory preset from the [Store] pull down menu. Turn on/off the lock function that disables all operations. Select serial port to be assigned to the window. 5 S-4000 RCS User Guide S-4000 RCS Window (continued) No. Name Functions This shows the status of serial communication between S-4000 RCS and S-4000 system. Ready: Communication is established REAC Down: No communication --: No signal 7 Serial Communication Indicator 8 [Clip] button Channel No. display Clip Indicator Level Meter [+48V] button [PAD] button Gain display Gain adjust slider Channel Name Turn off the clip indicator currently lit. Display of stereo link ON: Clip indicator lights in red if audio input level reaches 0dB. Set channel name. 9 10 11 12 13 14 15 16 Scene Window * Scene Window opens if "New Project" or other menu is selected from the "File" menu. Please refer to "Saving all system settings (Scenes)" on page 7 regarding operations of Scenes. 1 2 4 3 5 6 No. 1 2 3 4 5 Name Project Name display Scene No. [. . . ] Select a Project to open and click the [Open] button. The Scene window will open. 4. Click a Scene Number in the Scene List to select a Scene to open and click the [Read] button. Scene will be recalled. * It is also possible recall a Scene by double clicking the Scene Number. Editing a Scene Name 1. Double click the [Name] of the Scene in the Scene Window of the Scene you want to edit. [. . . ]