User manual ROLAND PR-80

[. . . ] 1. 2 Owner's Manual Thank you for your purchase of the PR-80 Realtime Video Presenter. 201b Before using this unit, carefully read the sections entitled:"USING THE UNIT SAFELY" (DV-7DL PRO ver2. 0 Owner's Manual P. 4), and "IMPORTANT NOTES" (DV7DL PRO ver2. 0 Owner's Manual p. 6). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. 206j 207 209 220 * * * * Windows® is known officially as: "Microsoft® Windows® operating system. " Apple and Macintosh are registered trademarks of Apple Computer, Inc. [. . . ] 84 Practical Use of the PR-80 Deleting Projects Moving Projects to the Trash 1. Click Selector's [Utility] button. The Utility screen appears. 2. Select the disk you want to work with from the "Disks" List. Right-click on the project you want to delete in the "Projects" List. A context menu appears. 4. Select "Move to Trash. " You can also delete projects by dragging the projects and dropping them in the "Trash" in the "Disks" list. You cannot remove a currently selected project. Completely Deleting Projects from the Trash 1. Click Selector's [Utility] button. The Utility screen appears. 2. Right-click on "Trash" in the "Disks" list. A context menu appears. 3. When the message "Do you want to empty trash?" appears, click [OK]. Emptying the Trash with this procedure completely removes the project from the hard disk; always confirm that you indeed want to delete the project before you delete it. Initializing a Removable Hard Disk 1. Go to the Selector and click the [Utility] button. The Utility screen appears. 2. In the "Disks" list, right-click the removable hard disk. A context menu appears. 3. Follow the instructions displayed. Performing initialization according to the procedure just described completely deletes any and all projects on the removable hard disk, so before you carry out the operation, be sure to check to make sure it's okay to go ahead and delete the projects. For information on how to work with a removable hard disk, refer to "Instructions for Installing the Hard Disk" (p. 139). 85 Practical Use of the PR-80 Using Scheduler to Control Presenter You can use the Scheduler function to play the clips you want at any time you like. You can also program it to stop playback and shut down the PR-80 at the desired time as well. Use of Scheduler requires that the PR-80's time be set. 41). You can also synchronize the PR-80 with the time data from a network time server and have the time adjusted automatically (p. You can click the [Clock] button to open the "Schedule Editor" screen and make settings for the schedule. Starting the Scheduler Go to the upper left of the Presenter screen and click the [Clock] button. The "Schedule Editor" screen appears. fig. scheduler01. eps Selects the month, Day, Week, Hour and minute Selects the palette and clip Selects the operation [Scheduler] button Creating a Schedule 1. Click the [Add] button to create a new schedule. You can add up to 100 schedules. 2. Click below "Month" and choose the month. If this is not to be specified (for example, when you want to specify only the day of the week), choose "*. " 3. In the same way, choose the "Day, " "Week" (day of the week), "Hour, " and "Minute. " If this information is not to be specified, choose "*. " ("*" cannot be selected for "Minute. ") If you specified the "Day" and "Week" (day of the week), then when a match with one or the other occurs, the operation you specify in step 4 is executed. 86 Practical Use of the PR-80 4. Choose the operation you want to carry out at the set time. · · · · · "Play": "Stop": "Shutdown": "Reboot": "Time Adj": Begins playback at the specified time. Accesses the time server over the network at the specified time and corrects the time setting. 5. If you selected "Play, " then choose the clip to play back. Select the palette, then select the clip. Making the Loop mode setting for the clips (p. [. . . ] 14 Video Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 35, 49 V-LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 32, 34, 37, 62 Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Volume Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]