User manual ROLAND PK-7 MANUAL 2

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Thank you, and congratulations on your choice of the Roland PK-7 Pedal Keyboard. [. . . ] While being careful not to pinch the cable, place the expression pedal on the PK-7. Use the three supplied knob bolts to fasten the expression pedal, making sure that the bolt holes are aligned. The connector in the upper part of the PK-7 is only for connecting the supplied expression pedal. Connecting this to any device other than the PK-7's own expression pedal could result in malfunction. To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Connecting to the VK-88 (Turning the Power On) Use the PK cable that is supplied with the VK-88 to connect the VK-88 and PK-7. MEMO The supplied AC adaptor is not used. The PK-7 will be turned on/off by the power switch of the VK-88, regardless of the position of the PK-7's own power switch. 1. Set the PEDAL KEYBOARD [SELECT] switch (located on the rear panel of the VK-88) to the PK IN position. Use the PK cable that is supplied with the VK-88 to connect the VK88's PK IN connector to the PK-7's PK OUT connector. As explained on the VK-88 Owner's Manual, turn on the power of the VK-88. If you hear the pedal part of the VK-88, connections are complete. You can select the part that will be sustained when you press the Hold pedal. 80) MEMO A variety of functions can be assigned to each foot switch (L/R). 68) 7 Connecting to the VK-8 (Turning the Power On) Use a MIDI cable to connect the VK-8 and PK-7. MEMO The PK-7 provides a "MIDI Merge" feature, which allows you to have the MIDI messages received at MIDI IN be combined with the MIDI messages produced by playing the PK-7 itself. The resulting merged data stream is then transmitted from the MIDI OUT connector. 1. 3. NOTE Make sure that the power of the VK-8 and PK-7 is turned off. Use a MIDI cable to connect the VK-8's MIDI PEDAL IN connector to the PK-7's MIDI OUT connector. Then connect the other end to a standard AC outlet. Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 4. 7. Turn on the power of the PK-7, and make sure that the indicator on the PK-7's rear panel is lit. As described in the VK-8 Owner's Manual, turn on the power of the VK-8. Make sure that the Sub-Keyboard Function is on (VK-8 Owner's Manual p. If the pedal part is heard from the VK-8, connections are complete. Once you have made connections as described above, you can use the switches and pedals to control the following functions. · Expression pedal: Control the volume of all parts of the Organ, and the Other Tones. · Hold pedal: Hold (sustain) the sound of the Organ voice and Other Tones. MEMO When the PK-7's FOOT SW-L OUT/FOOT SW-R OUT/HOLD jack is connected to the VK-8's CONTROL PEDAL jack, you can assign a variety of functions to the foot switch. [. . . ] Warehouse Area `DEPO' Pf. 83 H-2046 Torokbalint, HUNGARY TEL: (23) 511011 INDONESIA PT Citra IntiRama J1. 15J-150 Jakarta Pusat INDONESIA TEL: (021) 6324170 CYPRUS Radex Sound Equipment Ltd. 17, Diagorou Street, Nicosia, CYPRUS TEL: (022) 66-9426 CHILE Comercial Fancy II S. A. Rut. : 96. 919. 420-1 Nataniel Cox #739, 4th Floor Santiago - Centro, CHILE TEL: (02) 688-9540 PARAGUAY Distribuidora De Instrumentos Musicales J. E. [. . . ]