User manual ROLAND MV-8800

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (Owner's Manual; p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, the Owner's Manual, Screen Guide, and Appendices should be read in its entirety. These manuals should be saved and kept on hand as a convenient reference. Copyright © 2006 ROLAND CORPORATION All rights reserved. [. . . ] Press [STOP ( )] to stop playback. The PLAY indicator will go dark, and playback will stop. M-220 MV-8800 Owner's Manual Automating mute operations for each track Mute settings for each track can be recorded on the Mute Control Track and played-back. Recording mute operations 1. Hold down [SHIFT], and press [PAD BANKS]. The TRACK MUTE screen (Screen Guide; p. Move the current time to the location at which you want to start recording mute operations. Press [REC ( )]. The REC indicator will blink, and the RECORDING PARAMETER (MUTE CONTROL) popup (Screen Guide; p. Make recording settings as necessary. · Count In Specifies how recording will begin. Value Off 1 Meas 2 Meas Wait Note Explanation Recording will begin the moment you press [PLAY ( )]. When you press [PLAY ( )], a count-in will sound from one measure earlier than the record-start location, and recording will begin at the record-start location. When you press [PLAY ( )], a count-in will sound from two measures earlier than the record-start location, and recording will begin at the record-start location. Recording will begin the moment you press [PLAY ( )]. 13 Automating mixing operations (Automation) · Auto Punch Recording will begin (punch-in) and end (punch-out) automatically at the time locations you specify beforehand. Parameter In Out Value 0001-01-000 ­ 9999-**-*** 0001-01-000 ­ 9999-**-*** · Metronome Mode Specifies when the metronome signal will be output. Value Off Rec Only Play&Rec Always Explanation The metronome will not sound. The metronome will always sound. · Input Quantize You can record into the sequencer while applying quantization. Value: Off, (60), (80), (120), (160), (240), (320), (480) MV-8800 Owner's Manual M-221 Automating mute operations for each track 4. Press [PLAY ( )]. The REC and PLAY indicators will light, and the RECORDING PARAMETER (MUTE CONTROL) popup will close. Press [STOP ( )] to stop recording. The REC and PLAY indicators will go dark, and recording will stop. Recording will end automatically if you access any screen other than the TRACK MUTE screen (for example by pressing [EXIT]) while recording. Playback mute operations 1. Use CURSOR [ ][ ] to select the track on which you want to playback the mute operations. 3. Press [F2](Track Param). The TRACK PARAMETER popup will appear. 4. Use the Mute Control parameter to specify whether mute operations are to be played-back or not. · Mute Control Tracks will be muted/unmuted according to the track mute data recorded on the Mute Control Track. Value Off On On (Default=Off) On (Default=On) Explanation The recorded mute data will be disabled. With this setting, mute will automatically be disabled when you move the time location to the beginning of the track. With this setting, mute will automatically be applied when you move the time location to the beginning of the track. 5. If you want to enable/disable mute operations for other tracks, repeat steps 2­5. 6. Select "Track Mute Setup" and press [F5](Select). The TRACK MUTE SETUP popup will appear. M-222 MV-8800 Owner's Manual Automating mute operations for each track 9. Set the Mute Control Track parameter to On. The on/off status of the Mute Control Track parameter can be set for each Song and each Pattern. The on/off status of the Mute Control Track parameter for a Song can also be set from the SONG PARAMETER screen. The on/off status of the Mute Control Track parameter for a Pattern can also be set from the PATTERN PARAMETER screen. 10. [. . . ] 45-1, Block C2, Jalan PJU 1/39, Dataran Prima, 47301 Petaling Jaya, Selangor, MALAYSIA TEL: (03) 7805-3263 COSTA RICA JUAN Bansbach Instrumentos Musicales Ave. 1. Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211 IRELAND Roland Ireland G2 Calmount Park, Calmount Avenue, Dublin 12 Republic of IRELAND TEL: (01) 4294444 IRAN MOCO INC. No. 41 Nike St. , Dr. Shariyati Ave. , Roberoye Cerahe Mirdamad Tehran, IRAN TEL: (021) 285-4169 U. TEL: (323) 890 3700 TRINIDAD AMR Ltd Ground Floor Maritime Plaza Barataria Trinidad W. I. [. . . ]