User manual ROLAND MPU-IPC-T

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLAND MPU-IPC-T. We hope that this ROLAND MPU-IPC-T user guide will be useful to you.


ROLAND MPU-IPC-T : Download the complete user guide (742 Ko)

You may also download the following manuals related to this product:

   ROLAND MPU-IPC-T (249 ko)

Manual abstract: user guide ROLAND MPU-IPC-T

Detailed instructions for use are in the User's Guide.

[. . . ] The manual should be saved and kept on hand as a convenient reference. The protection circuit helps ensure safety by operating when excessive input continues for a long time while the device is at a location with a high ambient temperature. Sound drop-out may occur when the protection circuit is actuated during use. Please read through the documentation carefully to ensure correct use. Main Features · Adopting Roland's original FFP technology, this highly functional DSP bass amp features 30-watt sound output through a 25 cm (10-inch) coaxial 2-way wide-range speaker. [. . . ] Excessive loads can cause the insulation on the cord to heat up and eventually melt through. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 016 · Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 026 · Do not put anything that contains water (e. g. , flower vases) on this unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc. , near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101a · The unit should be located so that its location or position does not interfere with its proper ventilation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 102a · Always grasp only the plug on the power-supply cord when plugging into, or unplugging from an outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103a At regular intervals, you should unplug the power plug and clean it by using a dry cloth to wipe all dust and other accumulations away from its prongs. Therefore, before using the unit, you must allow it to stand for several hours, until the condensation has completely evaporated. 356 · Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. 359 · Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior finish. · 351 · A small amount of heat will radiate from the unit during normal operation. 558a · To avoid disturbing your neighbors, try to keep the unit's volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night). 559a · When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable. 921 · To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. [. . . ] EFX * DELAY/REVERB Polarity Switch When you connect only one foot switch by mono cable, you can only use it to turn EFX on and off. 13. AUX IN Jack You can connect a CD player or other kind of device and have it play along with your bass. * Determine the volume level by adjusting the volume control of the connected device. fig. 02 CHORUS In this effect, a slightly detuned sound is added to the original sound, giving the sound greater breadth and fullness. Turning the knob to the right increases the rate and deepens the chorus effect. fig. 03 FLANGER This creates a flanging effect that creates a sort of spinning sensation with the sound. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND MPU-IPC-T




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND MPU-IPC-T will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.