User manual ROLAND M-300

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2010 ROLAND CORPORATION All rights reserved. [. . . ] Select the DCA/MUTE groups that you want to include in the scope of recall, and de-select the DCA/MUTE groups that you don't want to be recalled. 121 Scene memory 4 OTHER parameter recall scope buttons Use these to specify other parameters that will be included in the scope of recall. Select the parameters that you want to include in the scope of recall, and de-select the parameters that you don't want to be recalled. The function buttons have the following operations: [F1 (CH 1­32)] [F2 (AUX/MTX/MAIN)] [F3 (OTHER)] Displays CH1­32 as the channel recall scope buttons. Displays AUX1­8, MTX1­4, and MAIN L/R/C as the channel recall scope buttons. Displays the DCA/MUTE group recall scope buttons and the OTHER parameter recall scope buttons. Use the DCA/MUTE group recall scope buttons of [F3 (OTHER)] to specify the DCA/MUTE groups that will be recalled. fig. ScrRecallSafeOther. eps 8. Use the OTHER parameter recall scope buttons of [F3 (OTHER)] to specify the other parameters that will be recalled. [F8 (CLOSE)] Using the Global Scope function 1. Press [F6 (GLOBAL SCOPE)]. fig. ScrRecallSafe. eps Synchronizing scene memories with M-48 memories Synchronizing M-48 store operations If desired, M-48 memories can be stored simultaneously when a scene memory is stored on the M-300. The current memory of each M-48 unit will be stored to the specified memory number (except for M-48 units whose MEMORY SAFE function (p. 171) is on). Scenes stored by this operation are set so that when they are recalled, the memories of the M-48 units will also be recalled. 1. Access the SCENE screen. Scene memory The GLOBAL SCOPE popup will appear. 2. Use the channel recall scope buttons of [F1 (CH 1­32)] to specify the channel recall scope. store operation, and press [F2 (STORE)]. fig. ScrSceneStore2. eps 4. Specify the scope of parameters that will be recalled for the channels you selected in step 3 using the channel recall scope buttons. 5. Use the channel recall scope buttons of [F2 (AUX/MTX/ MAIN)] to specify the channel recall scope. fig. ScrRecallSafeOut. eps The SCENE STORE popup will appear. 3. Verify the scene name shown in the name edit field, and edit it if desired. The M-48 memory will be stored with the same name. 4. In the M-48 MEMORY section, add a check mark to the STORE button 1 and specify the memory number 2 . fig. ScrM48MemStore_Guide. eps 6. Specify the scope of parameters that will be recalled for the channels you selected in step 5 using the channel recall scope buttons. 1 2 122 Scene memory The function buttons have the following operations: By holding down [SHIFT] and pressing [ ] or [ ], you can quickly move the cursor between the name edit field and M-48 MEMORY. [F1 ( PREV UNIT)] [F2 (NEXT UNIT )] [F7 (MEMORY SAFE)] Turns the MEMORY SAFE function on/off for the target M-48 unit. Change the target unit. You can press [F6 (MEMORY LIST)] to access the M-48 MEMORY LIST popup, where you can view the M-48's memory names. [F8 (CLOSE)] 5. Press [F8 (STORE)]. fig. ScrSceneStore_Conf. eps Synchronizing M-48 recall operations For each scene memory, you can specify whether M-48 memories will be recalled, and also specify the memory number that the M48 units will recall. A confirmation message will ask you to confirm the Store operation. When you recall the scene that contains this setting, each M-48 will recall its memory (except for M-48 units whose MEMORY SAFE function (p. Access the RECALL PARAMETER EDIT popup for the desired scene. If the user preference CONFIRMATION select button "SCENE/LIB STORE" is unchecked, the Store operation will be executed without showing the confirmation message. fig. ScrRecallParam. eps 6. Press [F8 (STORE)] to execute the Store operation. The operation will be cancelled if you press [F7 (CANCEL)]. If you want to exclude a specific M-48 unit from the memory store operation, use the M-48's MEMORY SAFE function (p. [. . . ] 136 BUTTON 9­16 tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 OTHER tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 USER FADER tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 USER screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]