User manual ROLAND KR-117

[. . . ] / Owner's Manual Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS, " "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] The range of transposition Bias You can select the range to transpose the data, from -24 (two octaves down) to +24 (two octaves up), adjustable in semitones. Item From For Tr/Pt Content Measure number of the first measure of the segment to be erased Number of measures to be erased Track button or part number to be erased When "All" is selected, the same portion of all parts is erased. Select from the following types of performance data to erase: All All performance data, including notes, tempos, tones switches, volume changes, etc. , are erased. Erasing the tempo data for all measures results in a single, constant tempo. Except Note Erases all of the performance data except for the notes. * You cannot transpose performances of the drum sets and sound effect sets (such as the Rhythm Track). Chapter 8 Event 148 Chapter 8 Creating and Editing Songs Item Content Expression Erases Expression (volume change) information. Lyric Erases only lyrics. Correcting Notes One by One (Note Edit) You can make corrections in a recorded performance one note at a time. This process of making changes in individual notes is called "note editing. " You can make these corrections by using note editing: · Deleting misplayed notes · Changing the scale of a single note · Changing the force used in playing a single key (velocity) · Change the finger number At Step 3 of "Selecting the Editing Function" (p. A screen like the one shown below appears. fig. e-note. e Event Exchanging Parts (Part Exchange) You can exchange the notes recorded for a particular part with the notes recorded for another part. This process of exchanging parts is called "part exchange. " At Step 3 of "Selecting the Editing Function" (p. A screen like the one shown below appears. fig. d-e-partex. eps_50 Location Pitch Velocity Finger Number Touch each exchange. to choose Parts you want to The note-location display uses "Measure: Beat: Tick" as the format. The Part number appears at the top of the screen. Chapter 8 Use the [ use < >< (Bwd)] button and the [ (Fwd)] button or > on the screen to find the note to be corrected. When you've found the note you want to correct, touch "Note" or "Velo. " for the note. When you're done making all the settings, press the [Exit] button. 149 Chapter 8 Creating and Editing Songs Modifying the Tone Changes in a Song (PC Edit) In some songs, the instrument sound changes during the course of the song (that is, the Tone changes in the middle of a Part). In such songs, an instruction to switch the Tone is inserted at the place where you want the sound to change. This instruction is called a "Program Change" (PC), and actions such as deleting program changes, or changing the selected Tone by them are called "PC editing. " * It is not possible to insert a program change into a measure or beat that does not contain a program change. A screen like the one shown below appears. fig. d-e-pc. eps_50 Changing the Beat in the Middle of a Song (Beat Map) You can create songs that have beat changes during the course of the song. * You can't change a song's beat once it's been recorded. Before recording the performance, determine the beat to be used. 1. Press the [Menu] button. The "Composer Menu" or the "A/V Sync" screen appears. 2. Touch <Beat Map>. The following screen is displayed if there is any previously recorded performance or any song with changed settings. fig. m-songmod. eps Touch <OK> to change the song's settings. Touch <Cancel> to discard the changes you're made. Location Tone Name A screen like the one shown below appears. fig. d-beatmap. eps_50 The PC-location display uses "Measure: Beat: Tick" as the format. (Bwd)] button and the [ (Fwd)] button or Chapter 8 > on the screen to find the program change to If you've recorded a song or changed a song's settings (see p. 137), a message asking you to confirm the deletion appears. When you've found the Program Change you want to modify, touch "Tone Name" on the screen. Press a Tone button to select a Tone group, then select a Tone with the dial. [. . . ] Music Sound Light 155, New National Road Patras 26442, GREECE TEL: 2610 435400 MIDDLE EAST BAHRAIN Moon Stores No. 16, Bab Al Bahrain Avenue, P. O. Box 247, Manama 304, State of BAHRAIN TEL: 17 211 005 NORTH AMERICA CANADA Roland Canada Music Ltd. (Toronto Office) 170 Admiral Boulevard Mississauga On L5T 2N6 CANADA TEL: (905) 362 9707 INDIA Rivera Digitec (India) Pvt. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 BRAZIL Roland Brasil Ltda. Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 PANAMA SUPRO MUNDIAL, S. A. [. . . ]