User manual ROLAND JUNO-STAGE

[. . . ] Conventions Used in This Manual Operating buttons are enclosed by square brackets [ ]; e. g. , [ENTER]. This indicates a memo regarding the setting or function; read it as desired. This indicates an explanation of a term; read it as necessary. 201a Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. [. . . ] Either press [3], or use the VALUE dial to select "PATCH EDIT" and press [ENTER]. The Patch Tone Copy window will appear. Initializing a Patch Here's how to return (initialize) the settings of the currently selected patch to their default values. If you want to return all settings to their factory-set state, execute the Factory Reset operation (p. In Patch mode or Performance mode, select the user patch that you want to initialize. Either press [3], or use the VALUE dial to select "PATCH EDIT" and press [ENTER]. Press [7 (EXEC)] to initialize the patch. 3. 4. fig. disp-tonecopy. eps 5. Use the cursor buttons to move the cursor, and use the VALUE dial or [DEC] [INC] to select the desired "Source (copy-source)" group, number, and tone. If you press [5 (COMPR)] to apply a check mark (), you'll be able to play the copy-source patch (Compare function). 6. 7. Use the cursor buttons to move the cursor, and select the "Destination (copy-destination)" tone. If you decide to cancel, press [6 (CANCEL)]. 4. 8. Press [7 (EXEC)] to execute the copy. Compare function When copying patch tones or saving patches, it's often convenient to use the Compare function. If you want to hear the copy-source (or save-destination) patch, press [5 (COMPR)] to apply a check mark (); now you can use the keyboard to play the copy-source (or save-destination) patch. * The patch may sound slightly different than normal when played via the Compare function. 96 Chapter 8. Detailed Editing for Patches Saving a Patch You've Created ([WRITE]) Changes you make are temporary, and will be lost when you turn off the power or select another patch. If you want to keep the patch you modified, you must save it to internal user memory. When you edit the settings of a patch in Patch mode, an "*" will be shown in the PATCH PLAY screen. If you've edited a patch in Performance mode, you should also save the performance after saving the patch (p. When you save, the data that previously occupied the save destination will be overwritten. If you're in Performance mode, the WRITE MENU screen will appear. Pressing [3 (PAT/RHY)] will access the PATCH NAME screen. Note when selecting a waveform The JUNO-STAGE uses complex PCM waveforms as the basis for its sounds. For this reason, you should be aware that if you specify a waveform that is very different than the original waveform, the result may not be what you expect. The JUNO-STAGE's internal waveforms can be categorized into the following two types. One-shot waveforms contain the entire duration of the sound from the attack until it decays to silence. Some of these waveforms capture a complete sound such as a percussion instrument, but there are also many attack component sounds such as the hammer strike of a piano or the fret noise of a guitar. [. . . ] 21, P. O. BOX 13520, Damascus, SYRIA TEL: (011) 223-5384 HONG KONG Tom Lee Music Co. , Ltd. Service Division 22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONG TEL: 2415 0911 Parsons Music Ltd. 8th Floor, Railway Plaza, 39 Chatham Road South, T. S. T, Kowloon, HONG KONG TEL: 2333 1863 CENTRAL/LATIN AMERICA ARGENTINA Instrumentos Musicales S. A. Av. Santa Fe 2055 (1123) Buenos Aires ARGENTINA TEL: (011) 4508-2700 DENMARK Roland Scandinavia A/S Nordhavnsvej 7, Postbox 880, DK-2100 Copenhagen DENMARK TEL: 3916 6200 SWITZERLAND Roland (Switzerland) AG Landstrasse 5, Postfach, CH-4452 Itingen, SWITZERLAND TEL: (061) 927-8383 MEXICO Casa Veerkamp, s. a. [. . . ]