User manual ROLAND FR-7

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLAND FR-7. We hope that this ROLAND FR-7 user guide will be useful to you.


ROLAND FR-7 : Download the complete user guide (3262 Ko)

You may also download the following manuals related to this product:

   ROLAND FR-7 (3690 ko)
   ROLAND FR-7 (179 ko)
   ROLAND FR-7 (1842 ko)
   ROLAND FR-7 (2024 ko)
   ROLAND FR-7 (4519 ko)
   ROLAND FR-7 ANNEXE 2 (41 ko)
   ROLAND FR-7 annexe 1 (4480 ko)
   ROLAND FR-7 VERSION 2 (6944 ko)
   ROLAND FR-7 KURZANLEITUNG (124 ko)
   ROLAND FR-7 (2024 ko)
   ROLAND FR-7 ANNEXE 251 (3328 ko)
   ROLAND FR-7 OS VERSION 2 (3591 ko)
   ROLAND FR-7 VERSION 2 MANUAL (3591 ko)

Manual abstract: user guide ROLAND FR-7

Detailed instructions for use are in the User's Guide.

[. . . ] r® FR-7/FR-5 Owner's Manual WARNING ­ To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING ­ When using electric products, basic precautions should always be followed, including the following: 1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] But be sure to do so before selecting another Free Bass register or Set ­ and before switching the FR-7/FR-5 off. Note: You can only edit one Free Bass register at a time. If you select another register before saving the changes for the previously selected register (by selecting "NO"), those changes are erased. Do not switch to Bass or Orchestra Bass mode before deciding whether or not you want to save your changes. Similarly, do not switch off the FR-7/FR-5 or select another Set before saving settings you want to keep: save them first. 4. 1 Reed Type This parameter allows you to transform the selected register into a different instrument and assign different sounds to each footage the register plays. Note: You will notice that there are fewer options here than for the Bass section. That's because you cannot play chords in Free Bass mode. To save your changes: (1) Press the [DATA÷ENTER] knob. The display now responds with: (2) If necessary, change the name of the Free Bass register you have just edited (you may want to enter the name of the "Reed Type" you selected). 39. · If necessary, press the [DATA÷ENTER] knob to select the "FOOT" parameter, then rotate the [DATA÷ENTER] knob to select the reed you wish to assign another sound to. The options are: ALL, 16, 8 · Press the [DATA÷ENTER] knob to select the "TYPE" parameter, then rotate the [DATA÷ENTER] knob to select a type ("instrument"). The TYPE options are: Bandoneon, Beltu, Beltu Amp, Buga, Cajun, Excels, Mauge, Morn, Organetto, Pierma, Pigi, Scanda, Sopra, Steierische, Trikitixa Note: Whenever you select "ALL" and set a different reed type, the "4. 4 Button Noise" and "4. 5 Reed Growl" settings are automatically adapted to the reed type you select here. You may have to change those settings afterwards if you wish to use different noise type. 47 FR-7/FR-5 V-Accordion Editing sounds | FREE BASS EDIT parameters 4. 2 Register The parameters on this page are used in combination with the parameters above. Here, you decide which reeds should be audible and how they should be played. It is therefore on this page that you specify whether the sounds you selected above will be used. · If necessary, press the [DATA÷ENTER] knob to select the "FOOT" parameter, then rotate the [DATA÷ENTER] knob to select the reed you wish to assign another sound to. The options are: ALL, 16, 8 · Press the [DATA÷ENTER] knob to select the "STATUS" parameter, then rotate the [DATA÷ENTER] knob to specify whether the selected reed should sound and which buttons can be used to play it. The STATUS options are: Off (no sound), Low (the lower half), High (upper half), Whole (all buttons). These options allow you to program what keyboard players would call a "split". You can create several nifty combinations, like "High" for 8' and "Low" for 16' (or vice versa) or "Whole" for 16' (all buttons) and "High" for 8' (only the upper three rows). Note: Assigning the same partial STATUS ("High" or "Low") to both reeds is a bit odd, because it leaves you with only half the number of active bass buttons. But it is possible. . . Note: Whenever you select "ALL" for "4. 1 Reed Type" and set a different reed type, this noise setting is automatically adapted to the reed type. It would therefore be a good idea to first select the reed type and only then change the noise type. 4. 5 Reed Growl This parameter allows you to simulate the typical noise a bass reed makes just before it stops vibrating altogether. Each instrument of the accordion family produces its own typical growl. The growl that matches the sound selected with "4. 1 Reed Type" probably yields the most realistic effect ­ but feel free to select another one if you like it better. · If necessary, press the [DATA÷ENTER] knob to select the "TYPE" parameter, then rotate the [DATA÷ENTER] knob to select one of the available instrument types: Bandoneon, Beltu, Beltu Amp, Buga, Cajun, Excels, Mauge, Morn, Organetto, Pierma, Pigi, Scanda, Sopra, Steierische, Trikitixa · Press the [DATA÷ENTER] knob to select the "LEVEL" parameter, then rotate the [DATA÷ENTER] knob to set the volume of the Reed Growl parameter (­30~ "Std"~30). Note: Whenever you select "ALL" for "4. 1 Reed Type" and set a different reed type, this growl setting is automatically adapted to the reed type. [. . . ] (GUANGZHOU OFFICE) 2/F. , No. 30 Si You Nan Er Jie Yi Xiang, Wu Yang Xin Cheng, Guangzhou 510600, CHINA Tel: (020) 8736-0428 NEW ZEALAND Roland Corporation Ltd. 32 Shaddock Street, Mount Eden, Auckland, NEW ZEALAND TEL: (09) 3098 715 CZECH REP. K-AUDIO Kardasovska 626. TEL: (2) 666 10529 SWEDEN Roland Scandinavia A/S SWEDISH SALES OFFICE Danvik Center 28, 2 tr. S-131 30 Nacka SWEDEN TEL: (0)8 702 00 20 HONG KONG Tom Lee Music Co. , Ltd. Service Division 22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONG TEL: 2415 0911 CENTRAL/LATIN AMERICA ARGENTINA Instrumentos Musicales S. A. Av. Santa Fe 2055 (1123) Buenos Aires ARGENTINA TEL: (011) 4508-2700 TURKEY Ant Muzik Aletleri Ithalat Ve Ihracat Ltd Sti Siraselviler Caddesi Siraselviler Pasaji No:74/20 Taksim - Istanbul, TURKEY TEL: (0212) 2449624 DENMARK Roland Scandinavia A/S Nordhavnsvej 7, Postbox 880, DK-2100 Copenhagen DENMARK TEL: 3916 6200 SWITZERLAND Roland (Switzerland) AG Landstrasse 5, Postfach, CH-4452 Itingen, SWITZERLAND TEL: (061) 927-8383 U. A. E. Zak Electronics & Musical Instruments Co. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND FR-7




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND FR-7 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.