User manual ROLAND FANTOM X6 UPDATE PROCEDURE

[. . . ] UPDATE DATA FOR SERVICE CD-ROM (#17041420) A computer (with a USB connector; the OS can be either Windows Me, Windows 2000, or Windows XP) You cannot use a Mac under any circumstances. One PC card (64 MB or more free space) or PC Used to back up user data USB cable If user memory contains important data, save the data (refer to Saving and Loading User Data) before you perform the update procedure. Use the [CURSOR] up/down buttons to select "System, " and then press the [ENTER] button. [. . . ] Copy the file "fanx. bin" file (located within the "Roland" folder) to the Fantom-X (removable disk). Verify that the LCD display of the Fantom-X indicates " [USB STATUS] Receiving. . " When the LCD display of the Fantom-X shows the " [USB STATUS] Connected. " indication for ten seconds or longer, this indicates that the copy has been completed. fig. update03_70 9. When you press the [1] button, the [Program Update Mode (USB)] screen will appear, and the LCD display will show as follows. fig. update04_70 16. On your computer, use the Safely Remove Hardware icon in the taskbar at the lower right of the screen to disconnect the Fantom-X from your computer. Turn the power of the Fantom-X off and then on again, and perform the version check and execute Test mode. Cautions when updating via USB After you have pressed the [ENTER] button at the end of the procedure described above, never turn off the power of the Fantom-X until the indication of "Completed. If the power is turned off during this time, the program will be erased. You must restart your computer before you begin the update procedure. 10. The LCD display will show "Initializing. . . . " and will then show as follows. If you decide to cancel the update, press the [EXIT] button before you press the [ENTER] button. Updating from PC CARD via the Fantom's PC card slot Required items · · * · * · UPDATE DATA FOR SERVICE CD-ROM (#17041420) Computer (the OS can be either Windows Me, Windows 2000, or Windows XP) You cannot use a Mac under any circumstances. PC cards (one with 32 MB or more free space, one with 32 MB or more free space (used to back up user data)) In addition, substitution to PC is possible for user data back up. PC CARD reader/writer If user memory contains important data, save the data (refer to Saving and Loading User Data) before you perform the update procedure. 34 FANTOM-X6 Procedure 1. Insert a 32 MB or larger PC card into the PC CARD reader/writer connected to your computer, and format it. Insert the UPDATE CD-ROM (#17041420) into your computer, and navigate to the "Roland" folder within the CD-ROM. Copy the entire "Roland" folder with its contents onto the PC card. [. . . ] The "Service Utility" screen will appear, and the LCD display will show as follows. If you decide to cancel the update procedure, press the [EXIT] button before you press the [ENTER] button. Turn the power of the Fantom-X off and then on again, and perform the version check and execute Test mode. Cautions when updating via PC card After you have pressed the [ENTER] button at the end of the procedure described above, never turn off the power of the Fantom-X until the indication of "Completed. [. . . ]