Detailed instructions for use are in the User's Guide.
[. . . ] The manual should be saved and kept on hand as a convenient reference.
Copyright © 2001 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following: 1. [. . . ] 191).
135
Recording Songs
Editing Songs
This chapter explains the procedure for editing songs. When the song has finished loading, the performance data of the loaded song will be displayed in the Song Edit screen.
fig. 11-02. e
Loading the Song You Want to Edit
When you edit a song, you're modifying a song that's already recorded into internal memory. When you're going to edit a song saved to disk, you have to first load it into the internal memory.
Track number Output destination of each track Status of each track
Indicates the name of the currently selected song, the measure location, Measure number the time signature, and the sequencer status.
The internal song will be lost if you turn power off or load another song into internal memory. If internal memory contains a song you wish to keep, you must save that song to disk (p. Into the disk drive, insert the disk that contains the song you want to edit. Press or (Select)].
fig. SONG_50
Measures containing sequencer data Measures containing no sequencer data
to select "Song Edit, " and then press [8
Locate number
Turns the RPS function on/off (RPS). Indicates/sets the song's playback tempo.
The Song Edit screen appears.
If you play back the song while the Song Edit screen is displayed, the screen will scroll in keeping with the song playback location.
Using Different Sound Generators for Each Track
By specifying the output destination for each track, you can use a variety of sound generators when playing back a song. Use [CURSOR] to move the cursor to "Output" for the track whose output destination you want to specify.
fig. 11-03
5. Use or to select the song that you want to edit, and then press [8 (Select)]. The Load Song File window appears.
fig. 11-01a_50
136
Editing Songs
3. INT: The track will be sounded by the Fantom's internal sound generator. Load the song containing the pattern for which you want to assign a name (p. Use or (Select)].
fig. 11-07_50
It is not possible to assign a locate position to a pattern. Use or (Select)].
fig. 11-08_50
to select "Locate, " and then press [8
to select "Pattern Name, " and then press [8
The Locate window appears.
The Pattern Name window appears.
4. Move the cursor to "Pattern, " and select the pattern for which you want to assign a name. Press or to move the cursor to the location of the character that you want to input. Move the cursor to the "measure" or "beat" value of the locate number that you want to set. At the bottom of the Song Edit screen, you will see the locate numbers ( ) of the locate positions you have specified.
When you press [7 (Set)], the locate position will be stored as the current location of the song. You can also set this by pressing [7 (Set)] while you listen during song playback.
You can press [8 (Name)] and use the Name window to assign a pattern name (p. 30).
Moving to a Locate Position
Use the following procedure to change the song location to a Locate Position. Use or to move the cursor to the locate number of the locate position to which you want to move. You will move to the specified locate position.
You can hold down [SHIFT] and press [BWD] to jump to the preceding location position, or hold down [SHIFT] and press [FWD] to jump to the next locate position.
138
Editing Songs
Specifying the Area of a Song that will Repeat (Loop Points)
When using Loop Play or Loop Recording, you can use the loop points you specify here to specify the repeated area, as an alternative to repeating the specified number of measures.
Editing Sequencer Data Over the Specified Range (Track Edit)
Track Edit lets you edit areas of sequencer data that you specify.
If the song time signature is different than the pattern time signature (pattern beat), the loop points will be displayed differently in the song and pattern. [. . . ] C. , V6V 2M4 CANADA TEL: (0604) 270 6626
INDONESIA
PT Citra IntiRama
J1. 15J-150 Jakarta Pusat INDONESIA TEL: (021) 6324170
COSTA RICA
JUAN Bansbach Instrumentos Musicales
Ave. 1. Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211
GERMANY
Roland Elektronische Musikinstrumente HmbH.
Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090
KOREA
Cosmos Corporation
1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855
MIDDLE EAST
BAHRAIN
Moon Stores
No. 16, Bab Al Bahrain Avenue, P. O. Box 247, Manama 304, State of BAHRAIN TEL: 211 005
CHILE
Comercial Fancy S. A.
Rut. : 96. 919. 420-1 Nataniel Cox #739, 4th Floor Santiago - Centro, CHILE TEL: (02) 688-9540
GREECE
STOLLAS S. A. Music Sound Light
155, New National Road Patras 26442, GREECE TEL: (061) 43-5400
Roland Canada Music Ltd. [. . . ]