User manual ROLAND DUO-CAPTURE

[. . . ] For the following languages, a PDF version of the Owner's Manual can be found on the CD-ROM. Deutsch, Français, Italiano, Español, Português, Nederlands Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. [. . . ] 16 Troubleshooting If you experience problems, read this chapter first. If this chapter cannot help you solve a problem, please refer to the support section of our website. If the problem is not resolved, refer to the contact information listed at the end of this document. Roland website: http://www. roland. com/ Driver Installation Problem Installer does not start Confirmation Are you attempting to install from a networked CD-ROM drive?Are you logged on with a user account that does not have administrator privileges?Cannot install Is the "Driver Signing Options" setting set to [Block]?(Windows XP) Are other programs or resident programs (such as antivirus programs) running?Warning or error appears during installation (Windows) In the "Device Manager, " do you see "Other device, " "Unknown device, " or a device for which "?, " "!, " or "x" is displayed?Installer does not exit Other than a mouse and keyboard, are any USB devices connected?Is the DUO-CAPTURE connected to a USB hub that is connected to a power supply?"Found New Hardware Wizard" appears again after driver was installed (Windows XP) Resolution You cannot install from a networked CD-ROM drive. Log on to the computer with a user account that has administrator privileges. Make sure that there are no USB devices connected to the computer (other than a mouse and keyboard) during installation. If you change the USB connector to which the DUO-CAPTURE is connected, the "Found New Hardware Wizard" may appear again even if the driver has already been installed on the computer. 12) and install the driver. Did you connect the DUO-CAPTURE to a different USB connector than the one you used when installing the driver? 17 Troubleshooting Problem Confirmation Resolution If you connect the DUO-CAPTURE to a different USB connector than the one you used when installing the driver, a numeral may appear with the device name. To have the device name appear without the numeral, connect the DUO-CAPTURE to the same USB connector used during installation, or reinstall the driver (p. 27). Numeral such as "2-" appears at beginning of device name (Windows) Did you connect the DUO-CAPTURE to a different USB connector than the one you used when installing the driver? Using the DUO-CAPTURE Problem Confirmation Is the driver installed?Make sure that the DUO-CAPTURE is connected to the computer correctly. Exit all programs that are using the DUO-CAPTURE, disconnect the DUO-CAPTURE's USB cable, and then reconnect it. Exit all programs that are using the DUO-CAPTURE, disconnect the DUO-CAPTURE's USB cable, and then reconnect it. Exit all programs that are using the DUO-CAPTURE, disconnect the DUO-CAPTURE's USB cable, and then reconnect it. (With some computers, the DUO-CAPTURE cannot be used if it is connected to the computer while the computer is starting up. ) Turn off the monitoring function (p. [. . . ] Open the "Control Panel" and set the display mode as follows . · Windows 7: Icon view · Windows Vista/Windows XP: Classic view 28 Troubleshooting 3. Double-click the DUO-CAPTURE icon . The "DUO-CAPTURE Driver Settings" dialog box will appear. 1 2 3 4 5 6 No . Setting Description You can adjust the input and output audio buffer size. After adjusting the buffer size, make sure to restart all programs that are using the DUO-CAPTURE. [. . . ]