User manual ROLAND DB-90 ANNEXE 283

[. . . ] Owner's Manual Thank you, and congratulations on your choice of the BOSS DB-90 METRONOME Dr. Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. [. . . ] The count-in function is canceled the next time the DB-90 is turned on. The count-in tone is not selectable. Starts and stops the metronome, Loop Play, reference tone and Rhythm Coach. - Metronome patterns are played in accordance with the Metronome mode settings. - The sound is switched to the Rhythm Coach tone and is not selectable. - Pressing [COACH] or [TRIG/GUIDE] stops the metronome, while a performance is playing. * The trigger sound is enabled only in Coach mode. Storing Settings to Memory The memory number flashes. 1. While the memory number is flashing, select the write-destination memory number with the TEMPO/VALUE dial. * Pressing [START/STOP] cancels the procedure, and the memory number remains lit. Once the memory number lights steadily, you'll know that the data has been successfully stored in memory. * * Do not turn off the power while data is being stored to memory (when the memory number is flashing rapidly). "EDIT" is displayed when you change settings from content stored in the memory. Press [WRITE] once more to store settings to memory; the memory number starts flashing rapidly. Auto Power Off The Auto Power Off function works to help prevent unnecessary battery drainage by automatically turning off the DB-90's power if no operation or adjustment is made within 60 minutes after any button is pressed. Disabling the Auto Power Off Function To disable the Auto Power Off function, first turn off the DB-90's power, then hold down the [TAP] as you press [POWER] to turn the power back on again. The Auto Power Off function is enabled again the next time the DB-90 is turned on again. Rhythm Coach: Time Check, Quiet Count, Gradual Up/Down, Step Up/Down Reference Tone: - Reference Pitch: A4=438 Hz-445 Hz (1 Hz steps) - Reference Tone Range: C2B6 (5 octaves, 12 semitones), Accuracy: ±1 cent Auto Backlight Off Time Check( ) Playing the Reference Tone 1. When the DB-90 is in Reference Tone mode, "NOTE, " and "PITCH" appears in the display. You can set the note name in semitone increments in the range from C2 to B6. "MUTE" appears in the display. Press [LIGHT] to turn on the backlighting. The backlighting automatically turns off in approximately five seconds (Auto Backlight Off function). " " disappears from the display when Auto Backlight Off is enabled. Auto Power Off function: Turns unit off after 60 min. Memory: - Metronome: 50 - Reference Tone: 10 Indicators: LCD Display, Tempo Indicator LED x 2 Connector: TRIG IN, START/STOP, MEMORY UP/DOWN, MIDI IN, PHONES x 2 (Stereo 1/4" phone type, Stereo miniature phone type), INPUT, AC Adaptor jack (for PSA adaptor) This mode is designed to provide extensive practice in drumming with the proper rhythm in time with the guide sound as counted out by the metronome. The display indicates whether or not the source for the mic input or pad is struck with the same timing as the metronome. Press [START/STOP] to begin to exercise. Disabling the Auto Backlight Off Function If you want the backlighting to stay on, first turn off the DB-90's power, then hold down [LIGHT] as you press [POWER] to turn the power back on again. The Auto Backlight Off function is disabled, and " " appears in the display. [. . . ] When you press [WRITE] during a performance, the tempo in effect at that time is set as the maximum metronome value (initial setting: 250). The minimum metronome value is set according to the tempo set with the TEMPO/VALUE dial or tap input. * Changing the minimum value resets the maximum value to the initial setting (250). Data Synchronized with the DB-90 For the USA The following MIDI messages are handled during synchronization with the DB-90. · Start · Continue · Timing Clock · Stop · Active Sensing 1. [. . . ]