User manual ROLAND CUBE-20XL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLAND CUBE-20XL. We hope that this ROLAND CUBE-20XL user guide will be useful to you.


ROLAND CUBE-20XL : Download the complete user guide (16233 Ko)

You may also download the following manuals related to this product:

   ROLAND CUBE-20XL (80332 ko)
   ROLAND CUBE-20XL (80332 ko)
   ROLAND CUBE-20XL (80332 ko)
   ROLAND CUBE-20XL (80332 ko)
   ROLAND CUBE-20XL (80332 ko)
   ROLAND CUBE-20XL (80332 ko)
   ROLAND CUBE-20XL (14541 ko)
   ROLAND CUBE-20XL MANUAL 2 (80332 ko)

Manual abstract: user guide ROLAND CUBE-20XL

Detailed instructions for use are in the User's Guide.

[. . . ] Owner's Manual Guitar Amplifier Owner's Manual Bedienungsanleitung Mode d'emploi Manuale dell'utente Manual del usuario Manual do proprietário Gebruikershandleiding Nederlands Português Español Italiano Français Deutsch English WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING - When using electric products, basic precautions should always be followed, including the following: 1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] The ON indicator lights up when EFX is turned on, and goes out when EFX is turned off. You can also turn EFX on and off using optional foot switches Graduations for CHORUS, FLANGER, PHASER, TREMOLO, SOLO, HEAVY OCTAVE on a panel are for reference. Be sure to check the sound as you adjust the effects. Type CHORUS FLANGER PHASER TREMOLO Description In this effect, a slightly detuned sound is added to the original sound, giving the sound greater breadth and fullness. This creates a flanging effect that creates a sort of spinning sensation with the sound. This effect adds a variable phaseshifted signal to the direct sound, giving the sound a swirling character. By using a foot switch to turn SOLO on/off individually for the JC CLEAN and LEAD channels, you can vary the volume and distortion of your sound. Since you can play chords even when using this effect, you can use it to fatten the sound of your chordal playing as well. 14. AUX IN Jack You can connect a CD player, digital audio player or other kind of device and have it play along with your guitar. * Determine the volume level by adjusting the volume control of the connected device. * When connection cables with resistors are used, the volume level of equipment connected to the AUX IN jack may be low. If this happens, use connection cables that do not contain resistors. 15. FOOT SW (Foot switch) Jack You can use foot switches (optional BOSS FS-5U or FS-6) to switch channels (JC CLEAN/LEAD), and to turn EFX/SOLO on and off. * CUBE-20XL is equipped with a TRS-type FOOT SW jack that accepts plugs of the configuration shown in the figure. To connect a foot switch pedal, use a TRS-compatible cable. TIP : SELECT RING : EFX/SOLO * For details on connecting foot switches, refer to "Connections" (p. * If you use a monaural cable to connect only one foot switch, it can be used to switch channels (JC CLEAN/LEAD). 16. RECORDING OUT/PHONES Jack · When Using RECORDING OUT Use mono 1/4" phone plugs when connecting to this jack. Volume level of RECORDING OUT can be easily adjusted if you set the JC CLEAN or LEAD Channel [VOLUME] knob as shown in the diagram on the right. * No sound is played through the unit's speaker while the RECORDING OUT/PHONES jack is in use. HEAVY OCTAVE DELAY/REVERB 12. [DELAY/REVERB] Knob Turn this knob to DELAY or REVERB to switch to that effect. Set the knob to the SPRING position to enjoy the sound of a spring reverb unit. * Graduations for DELAY, REVERB on a panel are for reference. Type DELAY REVERB Description Turn the knob to change the time and amount of delay effects. [POWER] Switch This switches the power on and off. 5 Nederlands Português Español Italiano SOLO Français Deutsch English This accepts a stereo miniature phone plug. Use a cable (sold separately) that's appropriate for the device you're connecting. Connections Foot switches Set the switches as shown bellow. [. . . ] (Toronto O ce) 170 Admiral Boulevard Mississauga On L5T 2N6, CANADA TEL: (905) 362 9707 HUNGARY Roland East Europe Ltd. 2045 Torokbalint, FSD Park, building 3. , HUNGARY TEL: (23) 511011 INDONESIA PT Citra Intirama Jl. 15J-15O Jakarta Pusat, INDONESIA TEL: (021) 6324170 CHILE Comercial Fancy II S. A. Rut. : 96. 919. 420-1 Nataniel Cox #739, 4th Floor Santiago - Centro, CHILE TEL: (02) 688-9540 PARAGUAY Distribuidora De Instrumentos Musicales J. E. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND CUBE-20XL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND CUBE-20XL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.