User manual ROLAND BF-2

[. . . ] 13 Using [STATUS] to select the track whose parameters you want to adjust . No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Compressing/expanding a sample according to the tempo at which playback was stopped While playback is stopped, you can adjust the length of the sample according to the tempo of the location at which playback was stopped. This function makes it easy to adjust the sample length to match the tempo of a sequence track. [. . . ] This operation pastes the phrases of the specified region to another location. If there were any phrases in the paste-destination, they will be overwritten by the phrases from the specified region. This operation inserts the phrases of the specified region to another location. If there ware any phrases in the inserting location of backward, they will be moved back for duration of specified region. During playback, you can switch audio tracks between muted (silent) and playing statuses. An audio track whose [STATUS] was dark when playback began cannot be switched to Play status by pressing [STATUS] during playback. During playback, press [STATUS] for the audio track that you want to mute (silence). [STATUS] will change from green to blinking, and the sound of that audio track will be muted (silenced). Once again, press the [STATUS] key that you caused to blink in step 1. [STATUS] will change from blinking to lighting solidly in green, and that audio track will resume playing. Using [STATUS] to select the track whose parameters you want to adjust When you want to adjust an audio track's mixer settings (pan, equalizer), or loop effect settings, you can also press [STATUS] for that audio track to select it directly. If you mix down without a CD-RW disc, the "Data Type" will be "Standard. If the pads/sequences contained in the BF-2's internal memory, a message of "Also use PAD/SEQ for Mixdown?If you press [YES/ENTER], you will be able to use pads/sequences, and [MIX DOWN] will light. If you want to use sequence tracks, press [SEQ PLAY] to make it light. For audio tracks that you want to include in the mixdown, press [STATUS] to make the button light in green. A sequence track and its corresponding audio track cannot be played back simultaneously. If you are unable in step 3 to select an audio track that you want to mix down, you must first exchange sequence tracks so that the desired tracks can be played back simultaneously. If you mix down without a CD-RW disc in step 1, a message of "Also use PAD/SEQ for Mixdown?Alternatively, you can move to a desired location so that recording will start from that point. If you play samples pressing pads during mix down is processing, the sample sounds in pads will be mixed down together. However, please be careful that sample sound dose not come out in case four stereo (incl. [. . . ] This parameter sets the ratio at which the output in the low frequency band is suppressed when the input level has exceeded the low threshold level. This parameter sets the ratio at which the output in the middle frequency band is suppressed when the input level has exceeded the middle threshold level. This parameter sets the ratio at which the output in the High frequency band is suppressed when the input level has exceeded the High threshold level. This parameter sets the time until when the low frequency band compressor starts working after the input level has exceeded the low threshold level. [. . . ]