User manual ROADSTAR CLR-2630U

[. . . ] USB English 1 2 English WARNINGS The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CLR-2630U DIGITAL ALARM CLOCK WITH USB MP3 AND FM PLL RADIO TABLE OF CONTENTS • • • • LOCATION OF CONTROLS POWER SUPPLY AC POWER SPECIFICATIONS 230v~ To reduce the risk of electric shock, do not remove the cover. [. . . ] Battery Back-up Power Failure Protection This radio has a battery back up circuit that will keep the correct time and alarm settings in the event of a temporary power interruption. Install a 2 x UM4 battery, not included, into the battery compartment located on the bottom of the unit. Change the battery every 9 to 12 months for best result and avoid possible battery leakage. If power is temporarily interrupted the display will blink and the radio will not play. However, the battery back-up circuit will continue to maintain the clock and alarm settings. When power is restored the clock will display the correct time and alarm settings, and no adjustment is necessary. Note: If power is interrupted and there is no battery in the compartment or the battery is exhausted. When power is restored the clock will begin to flash indicating that the time and alarm settings must be corrected. Set the alarm time by following this procedure: Press VOL/AL 1 Button or VOL/AL 2 two times. To select a shorter time press the SLEEP Button repeatldy until the desired sleep time is displayed. To turn off the Radio at any time during the Sleep period, press the ON / OFF Button. Follow the procedure in LISTENING TO THE RADIO to tune the radio to a station. Select display illumination level with by pressing SNOOZE/LIGHT button for tree seconds. CARE AND MAINTENANCE To prevent fire or shock hazard, do not allow this clock radio to be exposed to rain or moisture. This clock radio should not be exposed to direct sunlight, very high or low temperature, moisture, vibration, or placed in a dusty environment. Do not use abrasives, benzine, thinners, or other solvents to clean the surfaces of the clock radio. [. . . ] Correct Disposal of This Product (Waste Electrical & Electronic Equipment) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. [. . . ]