Detailed instructions for use are in the User's Guide.
[. . . ] DX 4542
Operating Instructions
1 2 3 4 5 6 7
Operation Optional Functions User Tools Replenishing Supplies Troubleshooting Remarks Specifications
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information before using the machine.
Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Important Contents of this manual are subject to change without prior notice. [. . . ] The contents that you have stored are now effective.
50
Recall
Storing Class Mode Settings
D Use the {~}{}} keys to select a
number, and then press the {OK} key.
A Press the {User Tools} key.
1
Note If the number is already in use, a message will be displayed asking if you wish to overwrite the settings stored. Otherwise press the {Escape} key to return to the previous display, and then select another number.
ZLKS084E
B Use the {~}{}} keys to select 3
Initial Setting, and then press the {OK} key.
E With the number keys, enter the
number of prints, and then press the {q} key.
C Use the {~}{}} keys to select 7
Prog. /Change:Clss, and then press the {OK} key.
F With the number keys, enter the
number of classes, and then press the {q} key.
Note Repeat Steps D to F to register all your classes.
G Press the {OK} key. The contents that you have stored are now effective.
51
Operation
Recalling the Stored Settings
F Press the {Master Making} key.
1
A Press the {Memory/Class} key.
ZLKS030E
ZLKS052E
Printing starts automatically after the trial print.
Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off".
B Use the {~}{}} keys to select Recall, and the press the {OK} key.
C Use the {~}{}} keys to select the
number to recall, and then press the {OK} key.
D Confirm that the settings are correct, and then press the {OK} key.
Note To change the stored settings, use the {~}{}} keys to select the item that you wish to change, and then overwrite using the number keys.
E Set your original.
52
Combine
Combine
Use this function to combine two originals onto one sheet of paper.
1 2
1
2
Note When the two originals are combined, their sizes would be reduced or enlarged as follows:
Metric version
Original Size A4K B5K A5K B6K Paper Size A3L 100% 115% 141% 163% B4L 87% A4L 71% B5L 61% A5L 50% B6L -- 100% 122% 141% 82% 71% 58% 50% 100% 115% 87% 71% 61% 100% 82% 71%
Inch version
Original Size 81/2" × 11"K Paper Size 11" × 17"L 81/2" × 14"L 81/2" × 11"L 51/2" × 81/2"L 100% 77% 65% 50% 51/2" × 81/2"K 129% 100% 100% 65%
If the length of the first original is shorter than 91mm, 3. 6" , Combine mode will be disabled. You can set the machine to automatically cancel Combine/Repeat mode once you have finished using it. Any image closer than 5mm, 0. 2" to the leading edge of the first original will not be printed. Also, any image closer than 4mm, 0. 16" to the leading edge of the second original will not be printed. When the image is too close to the leading edge, make duplicates of the originals with the image shifted away from the leading edge, and then print from the duplicates. You can select different image settings for the first and second originals. If they do not, then the two images will not be properly aligned on the prints.
Reference For details on how to use the optional document feeder when combining originals, see p. 67 "Using the Document Feeder when Combining Originals".
1
53
Operation
A Press the {Combine/Repeat} key.
D Press the {Master Making} key.
1
ZLKS053E
ZLKS030E
B Use
the {~}{}} keys to select Combine 2, and then press the {OK} key.
E After the first original has been F Press the {Master Making} key.
scanned, place the second original in the same way.
C Place the first original face down
on the exposure glass.
ZLKS030E
Printing starts automatically after the trial print.
ZDCH110E
Note When combining originals, place the original face down on the exposure glass with its leading edge towards you, as shown above.
Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off".
54
Repeat
Repeat
Use this function to repeat the image twice on the same sheet of paper.
C Set your original. D Enter the number of prints with the
number keys.
1
Limitation You cannot use the optional document feeder with the Repeat function. Note You can choose to have either Combine or Repeat selected by default when the power is turned on. See "6 Combine/Repeat" on p. 79 "4 Mode Setting".
ZLKS032E
E Press the {Master Making} key.
A Press the {Combine/Repeat} key.
ZLKS030E
Printing starts automatically after the trial print.
Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off".
ZLKS053E
B Use
the {~}{}}keys to select 2 Repeat, and then press the {OK} key.
55
Operation
Skip Feed Printing 1
If the backs of prints are dirty, you can use the {Skip Feed} key to make the drum rotate twice instead of once with every sheet of paper fed. This gives you time to remove prints one by one from the paper delivery tray, or to insert a sheet of paper between two prints.
Note You can specify how many times that the drum rotates when the power is turned on. Alternatively, you can also choose whether or not to change the number of rotations temporarily when the {Skip Feed} key is pressed. of Skip Feed" on p. 79 "4 Mode Setting".
D Press the {Master Making} key.
ZLKS030E
Printing starts automatically after the trial print.
Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off".
The number of rotations can be set from 2 to 9. The default is 2.
A Press the {Skip Feed} key.
ZLKS085E
B Set your original. C Enter the number of prints with the
number keys.
56
Program
Program
Use this function to store up to nine frequently used print job settings and to recall them for future use.
Note The stored contents will not be cleared even when you turn off the main switch.
Storing Print Settings
1
A First specify the print settings that
you wish to store.
B Press the {Program} key.
The stored contents cannot be deleted. To change the contents of a program, overwrite it with new print settings. [. . . ] · Locations directly exposed to cool air from an air conditioner or heated air from a heater. (Sudden temperature changes might cause condensation within the machine. ) · Places where the machine might be subjected to frequent strong vibration. · Areas with corrosive gases.
126
Where to Put the Machine
Power Connection
R WARNING: · Connect the power cord directly into a wall outlet and never use an extension cord.
· Only connect the machine to the power source describe in the manual. · Do not damage, break or make any modifications to the power cord. [. . . ]