User manual REVOX RECONTROL M218

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual REVOX RECONTROL M218. We hope that this REVOX RECONTROL M218 user guide will be useful to you.


REVOX RECONTROL M218 : Download the complete user guide (120 Ko)

You may also download the following manuals related to this product:

   REVOX RECONTROL M218 CONNECTION PLAN (95 ko)

Manual abstract: user guide REVOX RECONTROL M218

Detailed instructions for use are in the User's Guide.

[. . . ] REVOX The Philosophy of Excellence M218 M218 Connection plan The M218 wall-mounted remote control panel enables you to control additional room amplifiers. [. . . ] Screw the M218 board onto the flush mounting box using either the slot-holes at the sides or the drilled holes located at the corners. Please note: In either case, you must make sure that the screws are only finger tightened, otherwise there is a danger of cracks occurring in the board. There are lengthwise internal grooves provided for the Jung and Gira systems: V209/ 219 connection panel External IR Receiver Options AB (DIN plug view: solder side) VCC ( 10Volt) 7 6 3 1 524 There are two solder pad fields on the rear of the board, labelled A and B (see Connection plan). Option A In some cases, it can be advantageous to turn the IR receiver off. Solder pad A closed (solder bridge in place) IR receiver: Off Solder pad A open (no solder bridge in place) IR receiver: On Data IR Earth: GND As well as the earth on PIN 2, the housing of the 7-pin DIN plug should also be earthed. Technical data The external trapezoid shaped cutouts should be used with the Merten system: Option B Using option B, you can re-address the tuner command (remote address) from tuner to AUX3. In this way, for example, you can listen to the first tuner in the main room (and Zone 1) and independently of this, use the second tuner in Zones 2 ­ 4. M51 Setup / Remote Menu Remote button "Tuner" is selecting "FM Tuner" in slot 1 Remote button "Aux3" is selecting "FM Tuner" in slot 2 TUNER CD SERVER AUX2 Tip: Up to 5 M218 can be switched in parallel Max. cable length: 40m Power consumption: 17 mA E & OE We reserve the right to make technical modifications. Connection Connection is made using a two-part, 3pin Phoenix plug as shown printed on the board. VCC : Data: GND: + 8 to 20 V (factory setting) IR signal Earth / Screening < > LOCAL - VOL + OFF REVOX GND Data VCC 1. 551. 320. 11 5V A B Now, when you press the Tuner key on the M218, the second tuner in Slot 2 is selected. [. . . ] Please supply a complete description of the problem and a full return postal address. REVOX recommends the use of a 2-core, screened cable (microphone cable), where the screening us used as the earth. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE REVOX RECONTROL M218




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual REVOX RECONTROL M218 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.