User manual REVOX RECONTROL M207

[. . . ] Touch Screen Remote Control Re:control M207 User's Manual Preface Preface About this manual This manual is designed to make using the Re:control M207 Remote Control as easy as possible. Information in this document has been carefully checked for accuracy and is subject to change without notice. Copyright © Copyright 2004/8 This document is protected by the international copyright law. No part of this publication may be reproduced by any means without the permission of REVOX GmbH in Germany. Any changes and enhancements to the product and to the information thereof will be documented and issued as a new release to this manual. i Table of Contents PREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The words you can add to the description will depend on the points you choose. To add a description to a soft key, you just need to choose the specific device in advance and follow the former steps. 3. 4 Re-label a Device, Key or Text With the function, you are able to rename a device, soft key or text. Re-label" item and then you will enter the Please choose the " submenu. On tapping the soft key, you will see the indication for the function. Please select the device you want to rename. 4. 5. And then you need to make a decision: to re-label the device itself or to go into device to re-label its soft keys. Re-label device: If you decide to re-label the device, please key in the new name. Into device: If you decide to re-label the soft key in the device, please choose the key you want to rename and key in the new name. 29 Re:control M207 User's Manual Select letters key to select the Tapping the capital letters, lower case letters or special text for your selection. key to select more Select Icons key if you want to delete Delete letters/icon Tapping the the letters or symbols. button to confirm your decision. If you want to re-label the text, please select the text you want to change and follow step 4. You can continue to select other keys to rename until you finish renaming all keys. 30 Chapter 3 How to Set Your Re:control M207 3. 5 Re-size a Device, Key or Text With the function, you are able to re-size a device, soft key or text. Please choose the " Re-size" item and then you will enter the submenu. On tapping the soft key, you will see the indication for the function. After reading the tips, please press the button to go to next step. 4. Please select the device you want to resize. 5. 6. Making a decision to re-size the device itself or to go into device to re-size its soft keys. After you determine the second point, the key 31 Re:control M207 User's Manual frame will show up on the screen automatically. button to If you want to relocate the points, you can press the quit. The way to re-size a soft key is similar to the way to add a soft key. You cannot revise a soft key device that will overlap the adjacent keys. 32 Chapter 3 How to Set Your Re:control M207 3. 6 Delete a Device, Key or Text With the function, you are able to delete a device, soft key or text. Please choose the " Delete" item and then you will enter the submenu. On tapping the soft key, you will see the indication for the function. After reading the tips, please press the button to go to next step. 4. And then you need to make a decision: to delete the device itself or to go into device to delete its soft keys. 5. If you select a device to delete, you will see a message to confirm your decision. Please choose "Yes" or "No" to confirm your decision. If you go into device to delete its soft keys, you will delete the key directly by tapping the soft key. [. . . ] With Transmit Wire the Re:control M207 also can duplicate the user setup data for one to another. RemoteComm: With the "RemoteComm" software enables user to customize the remote control, create macros and timers. Upgrade Tools: With the "Upgrade Tools" enables user to upgrade MCU program and Pre-Programmed Code. (Please refer to 5. 3 Upgrade VMCU Firmware and VMCF Pre-programmed Codes P. 65) Duplicate: By connecting a "Transmit Wire" between two Re:control M207s, you can duplicate settings and functions from one Re:control M207 to another. [. . . ]