User manual REVOX RECONTROL BROCHURE

[. . . ] At each level, you will find an individual, clear display that can be modified to suit your own personal requirements. The Re:control M207 can be individually programmed, offers a wealth of setup options and maximum comfort levels. And there are practically no limits to the flexibility of the Re:control M207. Energy-efficient As this remote control only switches itself on when it is in your hand, the batteries are only used when you are actually using the unit. Integrated Consider the following scenario. [. . . ] After that, all radio stations can be called Operating distance up through the M208 display, with their RDS station names. The M208 switches off automatically after a defined timeout, in order to conserve Frequencies energy. It switches itself back on again automatically as soon as it is moved, thanks to the integrated movement sensor. You can synchronise the radio station names as well as the contents of the Revox audio server with the Re:control M208. A suitable cable is available to connect the Re:system M51 to the remote control. As well as carrying out a synchronisation, the remote control is also directly loaded from the M51 though this cable. As with all Revox products, the software on the Re:control M208 is easy to update, allowing you to integrate functional extensions without any problem. The synchronisation connection for the Re:system M51 and a memory card, which stores the contents of the tuner and the server are both conveniently located behind a protective cover. W 62 x L 221 x H 22 mm 285 g, incl. 4 x AAA batteries 300 nA in normal operation 80 mA with background and button lighting approx. 10 m up to 450 KHz Details M207 Re:connect M207 You can control up to 64 devices with the infrared operation of the Re:control M207. An individually customisable user interface is available to you for each device, through the Touchscreen display. If required, you modify these to suit your own requirements and you can also add additional ones. The required device can be localised very quickly by through a simple database search. You can carry out these modifications and extensions to the user interface through your PC, using special software that can be downloaded free of charge from the Revox website. Structure the macro and timer functions using the same logic as operating procedures. The integrated brightness sensor only switches the background lighting on as required. And the movement sensor simplifies operation by switching the M207 on automatically each time it is moved. As well as the pre-programming for the M51 Multiroom System, Revox also offers versions for older Revox products such as the B200 series, the H series, Evolution, Emotion, Exception and Elegance. Technical detail Dimensions Weight Operating distance Frequencies Flash memory LCD display W 68 x L 210 x H 24 mm 210 g, incl. [. . . ] If required, the operating units can be integrated into other light switch programmes, apart from the attractive designs offered by the Gira and Feller ranges. M217/M218 details Diameter 68 mm per unit approx, W 88 x H 88 mm per unit, depending on model In double or multiple frames To the M219 Link or M51 Link, 4-core screened To the M217 or M219, 2-core screened M217 ­ M219, up to 100 m M218 ­ M219, up to 100 m M217 ­ M218, up to 30 m Re:system M51 M230 / M231 details M51 Link Re:connect M202 Crossvover-cabel PDA mit M231 Software Access Point Details M230 / M231 The Revox Multiroom System can be controlled very easily through Windows, with the Re:control M230 and M231 softwares. Directly from you desk or mobile with your PDA, you have your audio-video system completely under control with just a few clicks. Particularly in the case of a retrospective cabling of a house, the PDA solution is often the simplest and most effective method to handle the control of the complete system. In order to be able to access the Revox Multiroom System using the Re:control M231 software, certain other hardware is needed as well as a PDA with Windows CE 2003 Operating system. The basis is the Re:system M51 source management that is connected through M51 link to the Re:connect M202 ethernet interface. [. . . ]