User manual REVOX RECONNECT M201 IR INTERFACE

[. . . ] Revox of Switzerland. M201 Re:connect M201 The M201 interface brings undreamed comfort into the world of your M51. [. . . ] In this way, there is a simple one-button operation of the M51 available, which you can integrate seamlessly into your existing switch and socket design. The in-built IR eye in the keypad additionally allows the use of a remote control. So it's no problem if you want to connect the M218 keypad as well as the high sensitivity M204 to the M201 IR interface. Up to 3 M204s or M218s can be connected in parallel. 1 M201 Re:connect Connection Connection: M201 with the M51 The M201 interface is connected using a noncrossed 4-core telephone cable with an RJ11 plug (6P4C modular, see Fig. 1) to the M51 LINK socket on the rear of the M51 A 2 metre cable is included. If required, however, you can use a cable up to a maximum of 100 meters in length. Connection: M201 with the IR receiver The connection to the IP receivers or the wall-mounted remote control is done using a screw-fixable Phoenix plugged connector (see Fig. Revox recommends the use of a 2-core screened cable (microphone cable) where the screening is used as an earth. [. . . ] Please remember always to include an exact description of the error as well as a return address. M201-Interface manual / Part no. : 10. 30. 3012 3 [. . . ]