User manual REGENCY TMR-8 H L

[. . . ] You can be assured of faster, more powerful digging with a smoother response. 3 Versatility Flexible and functional for all jobs. High Flexibility Compact in size and with a transport weight under 2300 kg (5, 070 lb), the TMR-8 H L can be transported easily using a conventional trailer and pick up truck or transit van. The sturdy hoisting eyelets on the cab roof enable the easy and rapid relocation of the machine between sites. Automatic Swing Lock Safe transportation of the machine is aided by the Cat automatic swing lock which locks the machines upper body in place when the control console is raised or the engine is stopped. Work Tools A variety of purpose designed work tools are available, including buckets, quick couplers, hammer and auger. [. . . ] Connections are located close to the tool to reduce hose lengths and any potential damage. Additional line options are available to further increase machine versatility. Stick and bucket cylinder hoses are protected by routing them through the boom. Auxiliary Flow Control Machines configured with proportional auxiliary hydraulics, include the ability to adjust the flow for even greater tool control. Especially useful with tools such as angling ditching buckets. Thumb Ready Stick (North American Builds) The TMR-8 H L is configured with brackets and relief valves for simple and cost effective mounting of a hydraulic thumb. 4 Performance Powerful operation and greater uptime. Built Tough The front end of the TMR-8 H L is designed for hard work. Its rugged construction and protected hydraulics ensure that the machine is up to the toughest of jobs. Steel tubes, positioned above the boom supply the hydraulic fluid to the tools, ensuring protection from damage while keeping any maintenance quick and easy. A large steel rear door and removable panels allow room to efficiently work on the machine when required. The main hydraulic valve and lines are also easily reached through a removable floor plate and side panels. Durable steel body panels all round the machine offer good resistance to damage and are easily maintained to help keep the machine looking good and holding its value. Both side plates and the cab floor plate are easy to remove and provide unhindered access to all internal hydraulic components. 9 TMR-8 H L Mini Hydraulic Excavator Specifications Engine Engine Model Rated Net Power @ 2, 200 rpm (ISO 9249) Gross Power (ISO 14396) Displacement Yanmar 3TNV76 13. 2 kW 17. 7 hp 17. 9 kW 1116 cm3 24. 3 hp 40 in3 Blade Width Height Dig Depth Lift Height 1400 mm 300 mm 334 mm 294 mm 55 in 11. 8 in 13 in 11. 5 in Weights Transport Weight with Cab Transport Weight with Canopy Operating Weight with Cab Operating Weight with Canopy 2175 kg 2065 kg 2320 kg 2210 kg 4, 795 lb 4, 553 lb 5, 115 lb 4, 872 lb Hydraulic System Pump Flow @ 2, 200 rpm 26. 1 + 26. 1 + 19. 4 + 6. 4 L/min 240 bar 240 bar 150 bar 6. 9 + 6. 9 + 5. 1 + 1. 7 gal/min 3, 481 psi 3, 481 psi 2, 176 psi 8 gal/min at 2, 465 psi 4. 5 gal/min at 2, 900 psi 4, 900 lbf 3, 372 lbf 2, 990 lbf • Operating weight includes standard stick, rubber tracks, bucket, operator, full fuel. Travel System Travel Speed Gradeability 2. 5 km/h­ 4 km/h 30°/58% 1. 55 mph­ 2. 5 mph Operating Pressure – Equipment Operating Pressure – Travel Operating Pressure – Swing Auxiliary Circuits Primary Service Refill Capacities Fuel Tank Capacity Hydraulic Tank Capacity 24 L 19 L 6. 3 gal 5 gal 30 L/min at 170 bar Secondary 17 L/min at 200 bar Maximum Bucket Force 21. 8 kN Maximum Stick Force – Standard Stick 15 kN Maximum Stick Force – Long Stick 13. 3 kN Lift Capacity at Ground Level 2 m (6'7") Lift Point Radius Standard Stick Long Stick Front kg lb 1331* 2, 934* 1315* 2, 899* Side kg 734 729 lb 1, 618 1, 607 2. 5 m (8'2") Front kg lb 963* 2, 123* 943* 2, 079* Side kg 534 530 lb 1, 177 1, 168 Front kg lb 755* 1, 665* 740* 1, 631* 3 m (9'10") Side kg 416 411 lb 917 906 Front kg lb 638* 1, 407* 584* 1, 288* Maximum Side kg 350 317 lb 772 699 *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. 10 Dimensions All dimensions are approximate. 6 7 1 12 14 3 5 4 10 11 16 2 15 9 13 8 1 Height 2 Width 3 Transport Length (arm lowered) 4 Maximum Digging Depth 5 Maximum Vertical Dig Depth 6 Maximum Dig Height 7 Maximum Dump Height 8 Maximum Reach at Ground Level 9 Tail Swing Radius 10 Maximum Boom Offset (RH) 11 Maximum Boom Offset (LH) 12 Maximum Dozer Lift Height 13 Maximum Dozer Dig Depth 14 Length of Undercarriage 15 Boom Swing Angle (RH) 16 Boom Swing Angle (LH) Standard Stick 2390 mm 7'10" 1400 mm 4030 mm 2400 mm 1570 mm 3950 mm 2750 mm 4020 mm 1170 mm 520 mm 360 mm 300 mm 335 mm 1840 mm 48° 77°/64° 4'6" 13'3" 7'11" 5'2" 12'11" 9'0" 13'2" 3'10" 20" 14" 12" 13" 6'0" Long Stick 2390 mm 7'10" 1400 mm 4030 mm 2600 mm 1750 mm 4070 mm 2870 mm 4220 mm 1170 mm 520 mm 360 mm 300 mm 335 mm 1840 mm 48° 77°/64° 4'6" 13'3" 8'6" 5'9" 13'4" 9'5" 13'10" 3'10" 20" 14" 12" 13" 6'0" 11 TMR-8 H L Standard Equipment Standard Equipment Standard equipment may vary. Consult your Cat dealer for details. • • • • • Hammer/two way auxiliary hydraulic lines Auxiliary quick disconnect couplers Dozer blade Working light mounted to boom Canopy – ROPS and TOPS protection • • • • • Retractable seat belt Suspension seat, vinyl covered Travel pedals Maintenance free battery Hydraulic oil cooler • • • • Fixed undercarriage Rubber track 250 mm (10 in) wide Automatic swing park brake Dozer float 12 TMR-8 H L Optional Equipment Optional Equipment Optional equipment may vary. [. . . ] Consult your Cat dealer for details. • • • • • Hammer/two way auxiliary hydraulic lines Auxiliary quick disconnect couplers Dozer blade Working light mounted to boom Canopy – ROPS and TOPS protection • • • • • Retractable seat belt Suspension seat, vinyl covered Travel pedals Maintenance free battery Hydraulic oil cooler • • • • Fixed undercarriage Rubber track 250 mm (10 in) wide Automatic swing park brake Dozer float 12 TMR-8 H L Optional Equipment Optional Equipment Optional equipment may vary. Consult your Cat dealer for details. • Cab, radio ready – ROPS and TOPS protection, heater/defroster and windscreen washer/wiper • Suspension seat, fabric covered • Boom stick or dozer blade check valve • Removable swing stop • Mirror pack • Additional hydraulic circuit diverted from bucket cylinder • Cab top guard to ISO 10262 (Level 1) • Auto engine idle • Joystick mounted proportional auxiliary control with flow control • Long stick • Cab/canopy lights • Second auxiliary lines 13 Notes 14 15 TMR-8 H L Mini Hydraulic Excavator For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www. cat. com © 2012 Caterpillar Inc. [. . . ]