User manual RCA RCD152

[. . . ] FCC Information EN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Inc. This device generates and uses radio frequency (RF) energy, and if not installed and used properly, this equipment may cause interference to radio and television reception. [. . . ] Press PAUSE or STOP to pause or stop recording respectively. Attention: Be sure to slide the cassette into the tape slot on the door. Note: For better recording quality, use normal bias tape (Type I) only. 4. Press PAUSE to pause playback (press again to release the button to resume playback). Press STOP/EJECT to stop playback. 7 RCD150 EN 10 1/16/04, 2:31 PM CD Player CD-R / RW This unit is compatible with audio CD-R/RW discs. Play and Pause 1. to EN Notes on CD-R/RW · Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. · To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read. · Playback capability for CD-RW discs may vary due to variations in the quality of the CD-RW disc and the recorder used to create the disc. Skip and Search 1. Press TRACK/TUNE or to skip to the previous or next track respectively. Press and hold TRACK/TUNE or to search quickly current track backward or forward respectively. Stop Playback Press STOP to stop playback. CD Remain Press REMAIN to select between showing Disc remain time and track elapse time. Selecting CD Mode When the unit is turned off, press ON/STANDBY / RADIO / TAPE / CD three times to enter CD mode. Loading Disc 1. The total number of tracks on the disc can be read from display. 8 RCD150 EN 11 1/16/04, 2:31 PM CD Player EN Programming 1. The program location and the track shows on the display with the PROG. and TRACK icons flashing. - Clearing program list Your program will be erased once you open the disc compartment door or change to another source mode (e. g. radio). Play Mode Press PLAY MODE/P once to repeat entire disc and [REPEAT] icon shows on display. Press PLAY MODE/P twice to repeat current track and a flashing [REPEAT] icon shows on display. Press SET again to confirm your selection and access the next program location. Press STOP to return to normal playback mode. Play Mode for Program List When Program playback mode is selected, press PLAY MODE/P for repeat program options. Press PLAY MODE/P twice in program mode to repeat the current track in the program. Press PLAY MODE/P the third time in program mode to play the programmed tracks randomly. Press PLAY MODE/P the fourth time to select repeat random playback for programmed tracks. again to return to normal Displaying the Program List Press SET repeatedly to show program list. Exit Program Mode Program mode will be deactivated once you press STOP to end program playback. Tips: If you are in normal playback mode but want to play the saved program, press STOP, then SET and then PLAY/PAUSE PLAY/PAUSE. 9 RCD150 EN 12 1/16/04, 2:32 PM Troubleshooting Tips Problem System doesn't turn on No sound Solution · Unplug the unit for a moment, and then plug it back in. · Try turning off electrical appliances near the unit, such as hair dryers, vacuum cleaners, or fluorescent lights. · · · · · Make sure you've put a CD in the tray. [. . . ] · Products which have been modified or incorporated into other products. · Acts of nature, such as but not limited to lightning damage. 13 RCD150 EN 16 1/16/04, 2:32 PM U. S. Warranty Limitation of Warranty: · THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. [. . . ]