User manual RCA LYRA X3000

[. . . ] Lyra Portable Multi-Media Recorder User's Guide X3000 (Rev 1. 0) Changing Entertainment. Again. Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product or AC charger to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. FCC and Industry Canada Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] Bookmarks Displays a list of stored bookmarks for the current video file. Highlight a bookmark and press SELECT to go to that playback position in the video file. Highlight Clear All Bookmarks to clear all bookmarks stored for the video file. Previous/Stop/Next Rewinds the video, pauses the video, and fast forwards the video. LCD Brightness Adjusts the brightness of the LCD screen. 32 Chapter 4 Chapter 4: Playing Files Viewing Video Content on Your TV You can view video content stored on the hard drive of your Lyra Recorder using the supplied Line Out cable if your TV has Audio and Video Input jacks. Connect the 3. 5mm mini-plug end of the cable to the LINE OUT jack on your Lyra Recorder player. Connect the red (audio right) and white (audio left) cables to the corresponding right and left Audio Input jacks on your TV. Turn on the power to your TV, and change to the corresponding input channel on your TV. CONTROLS HOLD NORMAL TV OUT 5. Switch the Mode Switch to TV OUT (locate the switch on the back of your Lyra Recorder Highlight and select Video. Press the ON/OFF button. . When finished viewing on the TV, and to display the video on the Lyra screen, move the Mode Switch back to the NORMAL position. Chapter 4 33 Chapter 4: Playing Files Recording Audio to Your Lyra Recorder Recording from Your Stereo System You can record audio from an audio/video component, such as a stereo system, using the supplied Line In cable if the component has Audio Output jacks. Note: You might want to change the Audio Record Quality setting in the Setup menu (go to Chapter 2) if you want to record at a lower quality to take up less space, or to record at a higher quality for better sound. The default record quality is 128 k (medium quality- mp3 audio). 1. Connect the 3. 5mm mini-plug end of the cable to the LINE IN jack on your Lyra Recorder player. Connect the red (audio right) and white (audio left) cables to the corresponding right and left audio out jacks on your stereo system. Turn on the power to your audio system, and select the mode you're recording from (for example, if you want to record a CD, make sure the stereo is in CD mode). Highlight and select Audio. 7. Press the RECORD button on the top of the Lyra Recorder when you're ready to record (the Recording Mode screen appears). If you need to, press PLAY on your stereo. 8. Press SELECT to begin recording, or highlight one of the pre-set times to record so you don't have to press ON/OFF to stop. Once recording begins, the record screen appears with status, recording time (if Start Recording was selected, this will be blank) elapsed time, recording quality and the file name shown. 34 Chapter 4 Chapter 4: Playing Files 9. When finished recording, you will be prompted to rename the new file. 10. Select No and the default file name is used and you're returned to Audio Navigation mode. Go to Using the On-Screen Keyboard on page 48 for information. Note: Recorded audio files must use the . mp3 file extension. If a file extension isn't specified, then the system automatically adds the . mp3 file extension to the file name during the save process. 11. Select Done from the keyboard screen when you've entered the new file name, or select Cancel to use the default file name. [. . . ] Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service. Write the SR number on the outside of the carton used to return the unit. Carefully pack the unit using the original box and packing material if possible. Please retain all non-defective accessories that were included with your unit such as the headphones. [. . . ]