User manual RAYMOND WEIL SPORT MULTIFUNCTIONS

[. . . ] To reactivate normal operation, simply push the crown back to position 1. The time which has elapsed since the hands stopped is automatically regained. 5. SYNCHRONISING THE HANDS AND DIGITAL TIME The hour shown by the hands and the digital time should be in perfect synchronisation. [. . . ] Turn the crown (in position 2) to display the name of the day in either: (F) French (E) English (D) German (S) Spanish All date settings as described in 6. 3. 1 to 6. 3. 3 are confirmed by pushing the crown back to position 1. 6. 3. 4 WEEK NUMBER The week number display is deactivated by pressing button A briefly (crown in position 1). It will reappear after another function is selected by turning the crown. Repeat if necessary. 6. 4 SETTING A SECOND TIME ZONE (OR HOME TIME OR SUMMER/ WINTER TIME) In "local time" (T1) display, select the second time zone (T2) function by briefly pressing button B then pulling the crown to position 2. 6. 4. 1 SELECTING THE 24 HOUR OR AM/PM MODE The time of the second time zone (T2) may be changed to display in the 24 hour or AM/PM mode by briefly pressing button A. 6. 4. 2 SETTING THE DIGITAL HOURS, MINUTES AND SECONDS The hours and minutes are set by turning the crown. Briefly press button B to confirm setting of the T2 hour, then adjust the T2 minutes and confirm again. Briefly press button B again to set the date for the second time zone chosen. 6. 4. 3 DATE OF THE SECOND TIME ZONE OPTION If you wish, you may set the date of the second time zone with a variation of ± 1 day to local time (T1). E. g. : If the date in the local time is the 25th, the date of the second time zone is either the 24th or 26th (maximum difference between two time zones is one day). 6. 4. 4 SETTING THE DATE OF THE SECOND TIME ZONE After you have pressed button B a third time as described in 7. 4, you may set the date of the second time zone by turning the crown. Push the crown back to position 1 after adjustment. 6. 5 SETTING THE ALARM (DAILY ALARM) 6. 5. 4 TESTING THE ALARM SOUND (APPLICABLE TO ALL ALARMS) When the alarm (AL) function is selected, the alarm sound may be tested by pressing and holding button B. The same test may be used for "Timer" and "Diary" alarms. 6. 5. 5 SETTING THE ALARM TIME ALARM ON/OFF 6. 6 PROGRAMMING AN ALARM (CALENDAR-ALARM) Push the crown back to position 1 after carrying out all the adjustments. The alarm is activated automatically on "ON" if its values have been modified since the last setting. Refer to 6. 5. 1 to reactivate. ALARM ON/OFF 6. 5. 1 STARTING THE ALARM Select the alarm function (AL) by turning the crown and pressing and holding button A. The letters "ON" will appear on the dial and a "beep" will be heard. After 10 seconds, the alarm will sound intermittently for 50 seconds and then stop automatically. 6. 5. 3 STOPPING THE ALARM The alarm may be stopped at any moment by pressing either of the buttons or the crown. 6. 6. 1 SELECTING THE CALENDAR-ALARM FUNCTION The calendar-alarm function (AG) is selected by briefly pressing button B when the alarm function (AL) is displayed, by turning the crown in position 1. This allows display of the calendar alarm stored or programming of a different alarm. [. . . ] ­ Turn the crown forwards or backwards to choose the required duration in minutes (max. (TM 99 ­ 23:59:00 in the example shown opposite). 5/6 ­ Turn the crown forwards or backwards to choose the required duration in seconds (max. (TM 99 ­ 23:59:59 in the example shown opposite). 6. 8. 2 USING THE TIMER ­ Briefly press button A to start the timer. [. . . ]