User manual RAYMARINE RAYCHART 420D

[. . . ] Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. Raychart 420/ 420D Chartplotter Owner's Handbook Document number: 81162_2 Date: January 2000 i RayChart 420 and 420D Chartplotter Owner's Handbook SAFETY NOTICES 1. Adjustments require specialised service procedures and tools only available to qualified service technicians ­ there are no user serviceable parts or adjustments. The operator should never remove the display unit cover or attempt to service the equipment. [. . . ] Press ENTER again (in response to the prompt) to name the route or CLEAR to save as the default ROUTE XX, where XX is the next available number. When naming a route, use the trackpad to move the cursor right or left to the character you wish to edit. The name can contain up to eight alphanumeric characters, including spaces. Chapter 3: Operation 3-11 5. Press ENTER to finish and clear the Route List, then press CLEAR to return to the chart mode. Clearing the current route from the screen To clear the current route from the screen, select CLEAR ROUTE. Select ROUTES or place the cursor over a route leg until the leg data is displayed in the Status Bar. Select CLEAR ROUTE and press ENTER to clear the route or press CLEAR to cancel the operation. If the route has not been saved, a prompt gives the options ENTER to save or CLEAR to remove the route from the screen. The Name Route functions are displayed , see Saving the Current Route above. Retrieving a route from the database You can select a route as the current route from the database list. The route list is displayed with the currently selected route highlighted: ä ä 2. The route list is removed and the selected route is shown on screen as the current route. 3-12 RayChart 420/420D Chartplotter Displaying route leg and waypoint information To display information about a route leg, move the cursor over the leg until its data is displayed in the status bar at the top of the screen. Erasing or (re)naming a route You can delete a route or re-name a route via the route list. Press CLEAR three times to remove the route list and return to chart mode. To name or rename a route, use trackpad left/right to select the character you wish to edit. To return to chart mode, press CLEAR again. ä ä Editing a route You can edit a route in order to: · Add a Waypoint into a route · Remove a Waypoint from a route ä ä To remove the data, move the cursor away from the route leg or press CLEAR. To display information about a route waypoint, move the cursor over the waypoint until its pop-up data box is displayed. To remove the data, move the cursor away from the waypoint or press CLEAR. Chapter 3: Operation 3-13 · Move a Waypoint (as described in Section 3. 2) · Reverse a Route Any changes you make to the route affect only the current route, so you need to save the route if you want to keep the changes. Inserting/deleting waypoints in a route To add a waypoint to the end of a route: Note: If no current route is displayed, select a route from the Route List and use the SHOW ROUTE function to make it active, see Retrieving a route from the database. Select EDIT ROUTE and press ENTER; the PLACE WAYPOINT function is shown as above (see Creating a new route). Add waypoints to the route by moving the cursor and pressing ENTER in the same way as the route was first created. Remove waypoints from a route by pressing CLEAR in the same way as the route was first created. Note: When deleting waypoints, if the route has not been saved, the waypoint is erased. Move the cursor over the route leg into which you wish to insert a waypoint. The route leg data is shown in the status bar and the ROUTE OPTIONS function, with help text, is displayed: ä ä 2. The cursor now controls the new waypoint which is connected to the existing waypoints on either side with a dotted line. Move the new waypoint to the required position and press ENTER to place it and return to normal cursor operation or CLEAR to cancel the operation. 3-14 RayChart 420/420D Chartplotter 6. [. . . ] Differential Global Positioning System Distance To Go Electro-Magnetic Compatibility Estimated Time of Arrival Global Positioning System Horizontal Dilution Of Precision. It is caused solely by the geometry between your vessel and your set of satellites. Man OverBoard National Marine Electronics Association (interconnection standard) Speed Over Ground. Time To Go Waypoint Cross Track Error MOB NMEA SOG TTG WPT XTE C-2 RayChart 420/420D Chartplotter Installation Template T-1 Installation Template RayChart 420 template TOP Drill hole 5 mm (3/16") diameter (4 positions) 164. 2 mm (6. 46 in) Cut out shaded area only Drill hole 6 mm (1/4") diameter (4 positions) Drill hole 10 mm (3/8") diameter (4 positions) 125 mm (4. 92 in) D4729-1 T-2 RayChart 420 Limited Warranty Certificate Raytheon Marine Company warrants each new Light Marine/Dealer Distributor Product to be of good materials and workmanship, and will repair or exchange any parts proven to be defective in material and workmanship under normal use for a period of 2 years/24 months from date of sale to end user, except as provided below. [. . . ]