User manual RAYMARINE HSB CHARTPLOTTER

[. . . ] Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. HSB Series Chartplotter owner's handbook Document number: 81150_1 Date: 18th September 1998 HSB Series Chartplotter HSB Series Chartplotter Installation and Operation Handbook SAFETY NOTICES 1. Adjustments require specialised service procedures and tools only available to qualified service technicians ­ there are no user serviceable parts or adjustments. The operator should never remove the display unit cover or attempt to service the equipment. [. . . ] To access the SAVE ROUTE soft key, press the ROUTE soft key, followed by MORE. (If required, you can use the trackpad to select another position in the list; this can be a blank slot, or an existing route that you no longer require). SAVE ROUTE 1 2 3 4 5 EMPTY EMPTY EMPTY EMPTY EMPTY NAME ROUTE?If you do not wish to name or re-name the route, press the NO soft key (or ENTER) to clear the list. The route is saved and is listed as Route Not Named. 54 HSB Series Chartplotter If you wish to name the route press the YES soft key. Use the trackpad to move the cursor right or left to the character you wish to edit. Then use the top or bottom of the trackpad to increase or decrease the letter or number. Press ENTER to finish and clear the Name List, then to return to the default soft key display, press ENTER again. Clearing the Current Route You can clear the current route from the screen. When you select CLEAR ROUTE if the current route has not been saved, you have the option of saving it and, if you are following the current route, you have the option to stop. ® To clear the current route: CLEAR ROUTE Clearing the Current Route & Retrieving a Route 1. Press the ROUTE default soft key or place the cursor over a route leg until the text RTE is displayed. If you are following the current route the STOP FOLLOW soft keys are displayed. If the route has not been saved the SAVE ROUTE soft keys are displayed. To clear the route, without saving it in the route database, press NO. The Name route soft keys are displayed and you should continue as described in the previous section, Saving the Current Route. The current route is cleared from the screen and the default soft keys are displayed. You can now use the ROUTE soft keys to make a route, or to show another route from the database. Retrieve a Route From the Database You can select a route as the current route from the database list. The grey selection bar indicates the selected route. Chapter 3: Waypoints, Routes and Tracks 55 ROUTE LIST CURRENT 1 2 3 4 EMPTY EMPTY EMPTY EMPTY SHOW ROUTE ERASE ROUTE ROUTE INFO NAME ROUTE D4263-1 SHOW ROUTE 2. Use the trackpad to select the required route then press the SHOW soft key. The route list is removed and the selected route is shown on screen as the current route. Displaying Route Information You can display the following information that relates to your route: · Route leg or waypoint information, using the context-sensitive cursor. You can use this information to review your passage plan. Route Leg and Waypoint Information ® To display information about a route leg, move the cursor over the leg until the letters RTE are displayed. A Route Leg data box such as the following is displayed. CURRENT ROUTE LEG 02 - 03 BRG 0°T RNG 5. 5nm D4259-1 To remove the data box, move the cursor away from the route or press CLEAR. ® To display information about a route waypoint, move the cursor over the waypoint until the letters WPT are displayed. [. . . ] During this period, except for certain products, travel costs (auto mileage and tolls) up to 100 round trip highway miles and travel time of 2 hours, will be assumed by Raytheon Marine Company only on products where proof of installion or commission by authorised service agents, can be shown. Warranty Limitations Raytheon Marine Company Warranty policy does not apply to equipment which has been subjected to accident, abuse or misuse, shipping damage, alterations, corrosion, incorrect and/or non-authorized service, or equipment on which the serial number has been altered, mutilated or removed. Except where Raytheon Marine Company or its authorized dealer has performed the installation, it assumes no responsibility for damage incurred during installation. This Warranty does not cover routine system checkouts or alignment/calibration, unless required by replacement of part(s) in the area being aligned. A suitable proof of purchase, showing date, place, and serial number must be made available to Raytheon Marine Company or authorized service agent at the time of request for Warranty service. [. . . ]