User manual RANE SL 1 QUICK START

[. . . ] If you downloaded the installer in Windows Vista or 7, double-click setup. exe in the compressed (zipped) folder. If a message tells you the software you are installing has not passed Windows logo testing, choose Allow or Continue Anyway. To change the directory you wish to install Scratch Live into, select Custom Install, otherwise choose Complete. [. . . ] Note: power is required, either from the USB port or an external 9 VDC power supply. * * Connect an external power supply to the SL 1 to power the THRU channels when USB power is not present. This allows you to play vinyl or CDs when the laptop is not present, useful for permanent installations or when using more than one laptop. The power supply is 9 VDC, 300 mA (or more) using a P6 type barrel plug. See OPTIONAL POWER SUPPLY on page 3 of the manual. oPTIoNAL CoNNECTIoNS To play normal records, connect the THRU OUTPUTS of the SL 1 to the mixer's phono inputs, then select Phono on your mixer for normal vinyl playback. To play normal CDs, connect the THRU OUTPUTS to a set of line inputs on the mixer when using CD players (when using Scratch Live with CD players you will need a mixer with a total of four line inputs). This plays normal CDs "thru" without disconnecting any wires. Note: power is required, either from the USB port or an external 9 VDC power supply when using the THRU outputs. * TURNTABLE CoNNECTIoN 1. Note: When connected properly, circles will be displayed within the scope view of the setup screen while playing the control records (see CALIBRATING SCRATCH LIVE in the manual for more info). Connect the LINE OUTPUTS of the SL 1 to the line inputs (sometimes called CD or AUX) on your DJ mixer -- check that those inputs are switched to line level. Note: If Scratch Live audio is excessively loud or distorted, the LINE OUTPUTS have been connected to phono level inputs by mistake. Connect the USB cable from the SL 1 to your computer as described in the previous section. TO MIC USB TO COMPUTER FROM TURNTABLE OR CD PLAYER OUT FROM TURNTABLE OR CD PLAYER OUT Cd PLAyER CoNNECTIoN 1. Note: When connected properly, circles will be displayed within the scope view of the setup screen while playing the control records (see Calibrating Scratch Live in the manual for more info). Connect the LINE OUTPUTS of the SL 1 to the line inputs on your DJ mixer, check that those inputs are switched to line level. Note: If Scratch Live audio is excessively loud or distorted, the FROM TURNTABLE GROUND FROM TURNTABLE GROUND MIC IN PHONO LINE PHONO LINE GROUND 2 RANE SL 1 FOR SERATO SCRATCH LIVE · QUICK START 2. 0 CALIBRATINg SCRATCH LIVE CALIBRATIoN When setting up Scratch Live in a new location, calibrate the software to the background noise picked up by the needles, cables and CD players. [. . . ] (Note to iTunes users: files in your iTunes library cannot be deleted this way). Toggle the input reverse switch Clear search string if searching, or exit Scratch Live. slot 1 ctrl - alt - Z Z slot 2 ctrl - alt - X X slot 3 ctrl - alt - C C slot 4 ctrl - alt - V V slot 5 ctrl - alt - B B slot 6 ctrl - alt - N N RIgHT dECK ctrl - or shift - ctrl - shift - shift - alt - ctrl - . [. . . ]