User manual RANE SIXTY-EIGHT FADERS ASSEMBLY

[. . . ] Magnetic crossfader Maintenance The crossfader in the Sixty-Eight is designed with materials highly resistant to corrosion and most chemicals. While it will handle millions of operations, it may become dirty over time. [. . . ] Do not disturb the position of the small sensors at each end of the Fader. If you accidentally do, make sure the parts are standing straight before reinstalling. You might be able to save it by removing the crossfader and thoroughly rinsing it in hot water. Make sure the part is clean and dry before lubricating or reinstalling. Removal of grease or other stubborn debris may require alcohol or contact cleaner. Make sure the part is clean and dry before lubricating or reinstalling. Contact Rane Corporation cHanneL fader cLeaning With heavy use in harsh environments, the channel faders may need lubrication. This treatment extends longevity and can make used faders as good as new. The fader assembly must be removed from the Sixty-Eight for proper cleaning. We recommend any of the following cleaning solutions: · Caig DeoxIT FaderLube F100 spray lubricant · Caig DeoxIT FaderLube F5 spray cleaner · CRC 2-26 (www. crcindustries. com) order caiLube McL® from: caig Laboratories, inc. Poway, CA 92064 Phone 858-486-8388 Fax 858-486-8398 Web www. caig. com a. Move the fader over its full travel back and forth a few times. customer service at 425-355-6000 or email us at info@rane. com. e. [. . . ] · Confirm cables are not crossed, with faders 1 & 2 on the left connector, faders 3 & 4 on the right connector, and the blue crossfader wires in the center. · Test all the faders before installing the fader panel face plate and fader knobs. 1 2 3 4 6 8 5 9 7 0 RANE SIXTY-EIGHT FOR SERATO SCRATCH LIVE · OPERATOR'S MANUAL 2. 1 [. . . ]