User manual RANE RAP 10

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RANE RAP 10. We hope that this RANE RAP 10 user guide will be useful to you.


RANE RAP 10 : Download the complete user guide (203 Ko)

You may also download the following manuals related to this product:

   RANE RAP 10 SCHEMA (86 ko)
   RANE RAP 10 DATASHEET (113 ko)

Manual abstract: user guide RANE RAP 10

Detailed instructions for use are in the User's Guide.

[. . . ] OPERATORS MANUAL RAP 10 REMOTE AC POWER SUPPLY GENERAL INSTRUCTIONS Using the RAP 10 is as easy as it looks. Connect the red outputs of the RAP 10 to the red input jacks on the products to be powered using the supplied 6-wire modular connector cables. [. . . ] Two lengths are offered, either 24 inches (package of 4), or 6 feet (package of 3). CUSTOMIZING POWER SUPPLY CABLE LENGTHS Rane makes available a Mod Cable Connector Kit for customizing cable lengths for each installation. This kit consists of a modular connector crimping tool (manufactured by AMP, Inc. ), plus (25) 6-pin modular connectors. 6-wire cable and modular connectors must be used for all interconnection. Do not substitute 4-wire for 6-wire cable and connectors. NOT ENOUGH CURRENT Each output of the RAP 10 is rated for a continuous current output of 650 mA. If more than 650 mA is required, and you have an unused output, the issue of paralleling arises. A cute trick that makes this easy is to use a 6-wir e wye-adapter (also called T-connector, duplex jack, dual modular phone coupler, etc. ). Plug the single male end into the unit to be powered, and run two 6-wir e cables from the duplex female side into two channels of the RAP 10. TOO MUCH CURRENT Sometimes you may be tempted to try and power two units from one output of the RAP 10. If the total current demand of both units is less than the 650 mA output current, this daisychaining (running power out of one unit into another) temptation becomes unbearable. In general, avoid daisychaining of power supplie . sDaisychaining of power only works between units interconnected by fully balanced technique s There can be no signal ground connecting . Failure to follow this rule results in hum due to an unbreakable ground loop caused by the common power supply path. [. . . ] REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. ©Rane Corporation 10802 47th Ave. W. , Mukilteo WA 98275-5098 TEL (425)355-6000 FAX (425)347-7757 WEB http://www. rane. com [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RANE RAP 10




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RANE RAP 10 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.