User manual RANE MLM 42S

[. . . ] If you are using condenser mics, flip the PHANTOM POWER switches to the ON position. Phantom Power only affects the XLR Inputs, not the ¼" TRS Inputs. If an Input Overload indicator lights, this is your clue to turn down its GAIN trim on the rear of the unit. [. . . ] An Output Overload condition is corrected by turning down one or more of the Input LEVELs. When the yellow LED is lit, the MLM 42S is ready to go. Manual- REAR PANEL DESCRIPTION MLM 42S 100-240 V COMMERCIAL AUDIO EQUIPMENT 24TJ 50/60 Hz 7 WATTS R OUTPUT THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR A CLASS 'B' COMPUTING DEVICE. EFFECTS A 4 RETURN SEND GAIN 3 B UNBAL. RANE CORP. BALANCED LINE MIC BALANCED OR LINE MIC ON PHANTOM POWER BALANCED O LINE 8 5 67 4 123 1 INPUTS 1 through 4 feature MIC-level XLR and LINE-level ¼" TRS connectors. A mono ¼" TS plug may be inserted into the LINE input if necessary, but better results come from a balanced TRS plug. See the RaneNote, "Sound System Interconnection" included with this manual. 2 PHANTOM POWER switch provides 15 volts to condenser microphones plugged in the MIC Input. 3 GAIN trim control sets the inital gain of the Input so the front panel LEVEL control has the most latitude without distortion. When the XLR MIC Input is used, the range of the GAIN is 12 to 50 dB and Phantom Power may be selected. When the TRS LINE Input is used, the range of the GAIN is 0 to 12 dB and Phantom Power is disabled. 4 EFFECTS SEND & RETURN loop connects external effects processors or expands to other mixers. 5 ¼" TRS and XLR Balanced OUTPUT jacks are provided for convenience. 6 OUTPUT LINE / MIC switch changes both balanced XLR and ¼" TRS Outputs to either LINE-level or MIC-level. Many DJ mixers have microphone engage and talk-over functions associated with the microphone inputs. By connecting the MLM 42S directly to one of these microphone inputs, you are able to take advantage of these features. 7 A & B Unbalanced RCA Outputs provide connection to line-level inputs. 8 Universal Voltage Input: via a miniature IEC 60320 C6 appliance inlet. [. . . ] Other applications for the EFFECTS loop may use only the SEND Output or only the RETURN Input. For example, a drum machine, keyboard or other mono source may be connected to the RETURN Input. The relative mix of the 4 Inputs versus the source present at the RETURN Input is determined by the DRY/WET pan control. [. . . ]