User manual RANE AX 30

[. . . ] DATA SHEET / MANUAL AX 30 ACTIVE STEREO CROSSOVER General Description The AX 30 Active Crossover is a special purpose stereo electronic crossover designed specifically for the recorded music playback club or lounge, operated mainly by a live disc jockey. Other applications exist; and the Model AX 30 can be found in several fixed, live music arenas as well. [. . . ] The Input signal is thus divided into a buffered and subsonic filtered full-spectrum output to feed the main system crossover, as well as two special purpose low and high end drive signals to feed additional power amplifiers connected to subwoofers and tweeter arrays. Additionally, the SUB BASS OUT has a pre-level SUB BASS INSERT loop. Parameter Inputs: . . . . . . . . . . Impedance . . . . . . . . . . Maximum Level . . . . . . . . . . Common Mode Rejection . . . . . . . . . . RFI Filters Sub Bass Outputs: . . . . . . . . . . Frequency Range . . . . . . . . . . Gain Range Tweeter Outputs: . . . . . . . . . . Frequency Range . . . . . . . . . . Gain Range Full Outputs: . . . . . . . . . . Frequency Range . . . . . . . . . . Gain Range Infrasonic Filter Maximum Output Level Output Impedance Signal-to-Noise Ratio Power Supply Requirment Maximum Current Unit: Construction . . . . . . . . . . Size . . . . . . . . . . Weight Shipping: Size . . . . . . . . . . Weight Note: 0 dBu=0. 775 Vrms Specification XLR 20k +22 40 Yes XLR 20 Hz - 100 Hz +16 to -60 XLR 7 kHz - 65 kHz +16 to -60 XLR 20 Hz - 65 kHz +6 to -60 20 Hz +24 200 90 re +4 dBu (20 kHz BW) 18 VAC w/center tap 600 All Steel 1. 75" H x 19" W x 5. 3" D (1U) 5 lb 4. 25" x 20. 3" x 13. 75" 9 lb Limit 1% 1 2 Units ohms dBu dB Conditions/Comments pin 2 hot per AES standards balanced 1 kHz pin 2 hot per AES standards 24 dB/octave upper and lower slopes 0 dB center detent pin 2 hot per AES standards 24 dB/octave lower; 6 dB/oct upper 0 dB center detent pin 2 hot per AES standards 24 dB/octave lower; 6 dB/oct upper 0 dB center detent 24 dB/octave Butterworth 600 ohms or greater; balanced balanced Any balanced output set unity gain Model RS 1 RMS Current from Remote Supply (4. 4 cm x 48. 3 cm x 13. 3 cm) (2. 3 kg) (11. 5 cm x 52 cm x 35 cm) (4. 1 kg) +0/-3 1 +0/-3 1 +0/-3 1 3% 1 1% 2 0. 1 Hz dB Hz dB Hz dB Hz dBu ohms dB Vrms mA Data Sheet-1 AX 30 ACTIVE STEREO CROSSOVER SUB BASS level control: sets the level of the left and right SUB BASS OUTs. TWEETER level control: sets the level of the left and right TWEETER OUTs. POWER INDICATOR LED: A lit yellow LED indicates there is power to all circuitry and the unit is ready to operate. Remote power supply input: This unit is supplied with a Rane RS 1 Remote AC Power Supply suitable for connection to this input jack. Never use a power supply other that the one supplied or a replacement approved by Rane. Using any other type of supply may damage the unit and void the warranty. Chassis grounding screw: A #6-32 screw is used for chassis grounding purposes. FULL OUTPUTS: Full frequency range Outputs available to drive subsequent crossovers or other equipment. SUB BASS INSERT JACKS: Subwoofer insert jack wired according to the tip=send, ring=return convention. Connect to the main program feed lines coming from the console or other full frequency source. [. . . ] Please refer to RaneNote 110, "Sound System Interconection" (included in this manual) for further information on system grounding. ©Rane Corporation 10802 47th Ave. W. , Mukilteo WA 98275-5098 TEL (425)355-6000 FAX (425)347-7757 WEB http://www. rane. com Data Sheet-2 All features & specifications subject to change without notice. [. . . ]