User manual RADIOSHACK MICRONTA 22-191 MULTIMETER

[. . . ] Acting like its namesake, Kameleon changes the Device Menu for the device being selected. for example , selecting TV displays a main menu that contains channel selection , volume control , and a keypad. However, selecting a DVD player still displays a menu with those same keys as the TV, but now navigation keys and transport controls are added for the DVD device. Animated key graphics also provide enhanced operational feedback, so you can easily see what mode is active and when commands are communicating with a device. [. . . ] If it does not, repeat steps 5 and 6, trying each code for your brand until you find one that works. If it still doesn't work, try Searching For Your Code on page 13. If desired, repeat steps 4 through 7 for each device you want to control. When finished, press twice to exit programming and return to the last-selected device menu screen. For future reference, write down the working device codes in the following boxes: VCR Code: NOTE: If you own a Sylvania TV/DVD Player Combo that has a separate TV code listed on page 73, use these instruction (including step 8) to program this device with the following changes: in step 5, enter 0675 as the DVD code; in step 8a, substitute TV for VCR; and in step 8b enter 0171 as the TV code. Before starting step 2, review the "Setup Codes For DVD Player/VCR Combos" (on page 70). NOTE: If the display turns off because of inactivity, you will need to start the programming sequence again by repeating this step. Once to return to the program keys Use the Setup Codes For DVD Player/VCR Combos (on page 70) to locate the brand name and use the number keys to enter the four-digit code for your device. NOTE: If the bottom IR segment displays one long flash instead, an error has occurred. (Optional) If you've located a setup code that works, but it also has a separate VCR code as listed on page 70, you'll need to program it into the remote to access VCR controls, as follows: a. NOTE: If a VCR setup code is not listed, you can use the VCR key to program a separate VCR or another device (see "Reassigning Device Keys" on page 22). If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked. Now, after you select a device that has volume unlocked, pressing VOL L, VOL M, or MUTE will control the device's volume only in its own mode. The bottom IR segment will flash four times, and the program keys will appear again. Volume will again be independently controlled according to its default states for all programmed devices. The RadioShack 4-in-One Remote includes a Keymover feature that allows you to map (or copy) keys from one mode (i. NOTE: Do not use any of the device keys as a source or destination key. For example, if your DVD player does not have volume control, you can map those keys (i. Upon keymoving, the bottom IR segment will flash twice as confirmation. Repeat steps 3 through 7 (starting on the previous page) two more times to map the remaining volume control keys, substituting VOL M and MUTE as source and destination keys in steps 5 and 7. Upon completion of the above procedure, you can now use your RadioShack 4-in-One Remote to control the TV's volume and mute in the DVD mode, as well as in the TV mode. Upon key restoration, the bottom IR segment will flash twice as confirmation. [. . . ] Modifying or tampering with internal parts can cause damage and invalidate the warranty. If your remote is not performing as it should, please contact us at: www. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics. the RadioShack 4-in-One Remote Powered By Kameleon is compatible for use in North America. [. . . ]