User manual RADIOSHACK KAMELEON 4-IN-1 UNIVERSAL REMOTE CONTROL

[. . . ] After installing four (4) new AAA alkaline batteries (not included), you can immediately use the remote to control an RCA TV, VCR, and DVD Player, and a Motorola Cable Box. The RadioShack 4-in-One Remote Powered By Kameleon provides the versatility of an LCD remote control with the feel of a traditional push button unit. The result is a stunning, bright display with engaging animation and touch-sensitive graphics for the user. The displays are divided into two types of interactive screens: Device Menus for normal remote control use, and Programming Menus for feature setup. [. . . ] NOTE: Before performing a code search for a CD or DVD player or a VCR, turn on the device and insert the required media. NOTE: With POWER as the search test function, a "Power On" IR command will be sent to the device each time a test code is sent. NOTE: If your device or its original remote control does not have a Power key, select a different test function in this step (e. , TV) press L one or more times and stop when a working code performs the test function selected in step 4. NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. To search for codes of your other devices, repeat steps 3 to 6, but use the appropriate device key and test function key for the device you are searching for. If you have set up the RadioShack 4-in-One Remote using the Searching For Your Code procedure (on the previous two pages), you may need to find out which four-digit code is operating your equipment. The bottom IR segment will flash twice and the Code Verification screen will appear. , three flashes = 3) and write down the number in leftmost box in the TV code boxes on page 11. NOTE: If a code digit is "0", the bottom IR segment will not flash. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. write down the code digits in the remaining TV code boxes on page 11. , PLAY), the bottom IR segment will display one long flash and return to the "Other" programming screen. To check for codes of other devices, repeat steps 4 to 6 , but substitute the appropriate device key for each device you are checking. The RadioShack 4-in-One Remote is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device's volume will be locked to one mode (e. After that, if desired, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. , VCR, TV, CBL/SAT, or DVD) where you want the volume controls locked to. The bottom IR segment will flash twice, and the program keys will appear again. Now, when you press VOL L, VOL M, or MUTE, the selected device's volume will be controlled, regardless of the mode selected. Upon key restoration, the bottom IR segment will flash twice as confirmation. In all modes except DVD, the RadioShack 4-in-One Remote can store a list of up to 10 favorite channels, in any order, that will be immediately scanned when you press FAV SCAN once (see Using Channel Scan on the next page). [. . . ] This product uses technologies licensed under one or more of the following U. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]