User manual RADIOSHACK ITZA 2

[. . . ] Turning Punch-Through Off /On If your cable converter or VCR has volume control, you might want to turn off punch-through so you can use the cable converter's or VCR's volume instead of the TV's. When you want to control the volume through your cable converter, press CBL before using the volume control. Press 9 - 9 - 3, then the device key you want to control all volume (TV, for example). [. . . ] Point the remote control at your TV/VCR combination and press POWER. Your device should turn off (or on, if it was off). If the remote does not operate your device, try the other codes you wrote down in Step 1. Note: Some TV/VCR combinations require a second code to control volume. If you cannot control volume, use the TV code from "TV/VCR Combination Codes". USER GUIDE FEATURES Your RadioShack ITZA 2 Remote Control can replace up to four infrared remote controls. Use it to control your TV, VCR, TV/VCR combination, cable converter, CD player and more. Your ITZA 2 Remote Control includes a fun feature that sends your remote control into a colorful strobing light show. This manual lists many manufacturers' 4-digit codes for TVs, VCRs, cable converters, CD players, and more. Your remote control's features include: · Powerful Infrared Beam ­ lets you operate your remote-controlled devices from a greater distance than many original remote controls. · Large, Easy-to-Use Keypad ­ with buttons in the ideal positions for easy operation. · Toll Free Support ­ brings expert help for your remote control when you call 1-888-284-8735. OPERATION General Operation 1. Point the remote control toward the device you want to control, then press the desired command keys. Repeat Steps 1 and 2 for all other devices you want to operate. Note: The command keys on the remote control work the same as the keys on the original remote control; however, the labeling might differ slightly. Note: To record, press REC twice. This helps avoid accidentally recording over tapes. MANUFACTURER CODES Use the following alphabetical list of device setup codes to locate the 4-digit codes to set up the remote control. Notes: · The ITZA 2 might not have every command from your original remote controls. · A key on the remote control that has the same name as a key on your original remote control might have a slightly different function. PREPARATION Installing Batteries Your remote control requires four AAA batteries (not supplied) for power. For the best performance and longest life, we recommend using RadioShack alkaline batteries. Cautions: 2. Press the device key for the type of remote you are replacing (TV, VCR, CBL, or AUX). Hold down P until the red light blinks twice, then enter the 4-digit manufacturer's code. For example, to replace a Panasonic TV's remote control (manufacturer's code 0051), press TV, hold down P until the red light blinks twice, then press 0 - 0 - 5 - 1. [. . . ] RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. [. . . ]