User manual RADIOSHACK 4-IN-1 REMOTE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RADIOSHACK 4-IN-1 REMOTE. We hope that this RADIOSHACK 4-IN-1 REMOTE user guide will be useful to you.


RADIOSHACK 4-IN-1 REMOTE : Download the complete user guide (276 Ko)

Manual abstract: user guide RADIOSHACK 4-IN-1 REMOTE

Detailed instructions for use are in the User's Guide.

[. . . ] To lock in the code, press and hold P until the LED blinks twice, then release P. To search for other device codes, repeat steps 1 through 5, substituting the appropriate key for the device you are searching for. NOTE: Only channels from one device can be stored for Favorite Channel Scan. 1. Use the keypad to enter a favorite channel number (e. g. , 031), then press P. Repeat step 4 for each favorite channel to be stored, up to a total of 10 channels. NOTE: If you try entering more than 10 channels, the remote automatically exits programming. Unlocking Volume Control for a Single Device (Individual Volume Unlock) 1. [. . . ] The LED blinks four times. Volume will be independently controlled for all programmed devices. USING CHANNEL SCAN Use SCAN (FAV) to start a three-second scan of all favorite channels (if programmed ­ see Programming Favorite Channel Scan) or all channels (if Favorite Channel Scan is not programmed). · If Favorite Channel Scan has been set up, the device scans your favorite channels, then continues to scan all channels for the device. · If Favorite Channel Scan has not been set up, scanning starts with the current channel. To stop scanning channels at any time, press any key once. OWNER'S MANUAL 5. Repeat step 4 for the three remaining digits, using 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. To check for other device codes, repeat steps 1 through 5, substituting the appropriate key for each device you are checking. INTRODUCTION The RadioShack 4-in-One Remote allows you to control your TV, VCR, cable/SAT/ DSS converter, and DVD player with one easy-to-use remote control. · Code Search and Verification - help you quickly set up the remote control to operate your devices. · Searchable Code Library - contains remote control codes for virtually every current brand and make. · Channel Scan and Favorite Channel Scan ­ let you "channel surf"all available and favorite channels. · Mode Reassignment ­ lets you add control of another TV, VCR, or DVD player or other auxiliary device. After installing four new AAA alkaline batteries (not included), you can immediately use the remote to control an RCA TV, VCR, and satellite receiver, and a Pioneer DVD player. To control other brands, follow the instructions in Programming A Device and Programming A TV/VCR Combo. CAUTION: If you do not plan to use the remote for an extended period, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. TROUBLESHOOTING PROBLEM: SOLUTION: PROBLEM: LED does not blink when you press a key. Make sure the remote is aimed at your device and is not more than 15 feet away. Remote control does not control devices or commands are not working properly. Some units may require both a TV code and a VCR code for full operation. Due to RCA design from 1983 to 1987, only the original remote control will operate these functions. Follow instructions in Changing Volume Lock. continued on back. . . A QUICK LOOK AT THE CONTROLS Use P for all programming sequences. The red LED blinks to show that the remote control is sending signals. Use the cursor keys to move the cursor in the program guide and menu screens. 5. Aim the remote control at the device and press POWER (or PLAY, if the device does not have a POWER key). If it does not respond, repeat steps 2 through 5, trying each code for your brand until you find one that works. [. . . ] This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102 Cat. 15-2126 04/02 CARE · · · · · Keep the remote control dry. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RADIOSHACK 4-IN-1 REMOTE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RADIOSHACK 4-IN-1 REMOTE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.