User manual RADIOSHACK 2-IN-1 UNIVERSAL REMOTE CONTROL

[. . . ] Its features include: Last Station Recall -- lets you go from the station you are currently watching to the last one at the touch of a button. Large, Easy-to-Use Buttons -- improve remote control access and operation. Powerful Infrared Beam -- lets you operate your TV or cable converter from a greater distance than many other remote controls. Extensive Code Library -- contains remote control codes for virtually every television and cable converter made today, including discontinued devices. [. . . ] Hold down P until the red light blinks twice, then enter the 4-digit manufacturer's code for the desired device. When the red light blinks twice, the remote control has accepted the code. For example, to set up the remote control of a Panasonic TV (manufacturer's code 0051), press TV, hold down P until the red light blinks twice, then press 0 0 5 1. 6 Preparation Note: If you entered the code incorrectly, the red light blink once. Point the remote control at your TV (or cable converter) and press POWER. If the remote does not operate your device, try the other codes listed in "Manufacturers' Codes" on Page 12 for your brand of TV or cable converter. You can also search to find a working code (see "Manual Code Search" on Page 10). Repeat Steps 2­5 to program the other device (cable converter or TV). Preparation 7 X Operation The command keys on the remote control work the same way as their counterpart keys on the original remote controls. Point the remote control at the device you want control and press its device key (TV or CBL). To turn off the remaining device, press its device key, then press POWER. CONVERTING THE CBL KEY If you are not using CBL, you can reprogram it to operate a second TV. Reassigning the CBL Key 1. Program the converted CBL key with the code for the second TV (see "Setting Up Your Remote Control" on Page 6). Now each time you press CBL, you can control the second TV by pressing the desired function keys. 8 Operation Restoring the CBL Key When you are finished using your second TV, you can restore the CBL key to control a cable converter. The red light blinks twice to indicate successful programming. USING VOLUME LOCK Volume Lock is preset so that pressing VOL+/­ or MUTE only controls your TV's volume, even if you press CBL. If your cable converter has a volume control, you can change this setting to add control of the cable converter's volume. Setting Volume Lock To Cable Converter 1. To control your cable converter's volume, press CBL then VOL +/­. Resetting Volume Lock To TV 1. The red light blinks four times. MANUAL CODE SEARCH If your TV or cable converter does not respond to remote control commands after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. Aim the remote control at the TV or cable converter and slowly alternate between pressing POWER and TV (or CBL). Note: The remote control sends codes from its extensive library to the selected device, starting with the most popular codes first. Because of the library's size, this procedure may take some time. When the red light blinks twice, the search of every code is complete. Note: If the TV turns off during the search, but does not operate after you lock in the code, begin the search again, pausing longer between key presses. Checking Your Code If you set up the remote control using the "Manual Code Search" procedure, follow these steps to find out what code is operating your TV or cable converter. Count the number of blinks (for example, 3 blinks = 3) and write down the number. Repeat Step 4, pressing 2, 3, and 4 to view the codes for each successive digit. Operation 11 X Manufacturers' Codes The following list tells you which 4-digit codes to enter to set up the remote control. [. . . ] In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. [. . . ]