User manual QUINNY SPEEDI

[. . . ] Safety, comfort and user friendliness have played an important role in the development of the Quinny Speedi. Therefore, please take the time to read through the instruction manual carefully. The Quinny Speedi only offers maximum safety only when it is used in accordance with the instructions. Continuous research by our development team, user tests and consumer reactions ensure that we are kept fully up to date in the field of child safety. [. . . ] Fabric components and other parts subject to wear: •  he cover should be cared for properly (see the T instruction manual for care instructions). It is normal for fabric to discolour from sunlight and to show wear and tear after a long period of use, even when used normally. The warranty period for the cover and other parts subject to wear, such as the tyres, is therefore limited to a period of no more than 12 months as of the date of purchase. Parasol clip 8 9 >> EN EN << Preparing the pushchair for use and instructions for use The illustration numbers correspond to the text (see illustrations on pages 3 to 5). Please note: The left and right sides are as seen from the handlebar/back of the Quinny Speedi. Unfolding / folding To unfold (1) T  he frame has been secured by means of a transport safety lock to prevent it from unfolding during transport. Release the lock by pulling the left handlebar safety lock in the direction of the arrow. (2+3)  Pull the handlebar upwards until it “clicks” into the handlebar safety lock. Placing / removing the wheels The 2 wheels with the brake cylinder should be mounted as rear wheels. (6+7)  Press the button in the middle of the hubcap while pushing the axle into the axle opening. (8) P  lace the wheel into the front fork by pressing the button (1) and then clicking the wheel into the opening on the front (2). (9) T  he swivel wheel can be adjusted into 2 different positions: fixed or swivelling (1). To lock it into the fixed position, rotate the swivel lock until 2 straight arrows appear in the display (2). 10 •  The swivelling front wheel will lock itself the moment the pushchair is pushed forward. €¢  Check the tyre pressure and inflate the tyre if necessary (see maintenance section for the maximum tyre pressure allowance). (10+11)  o remove the rear wheels, press the button on the T hubcap and pull the wheel out of the axle opening. €¢  remove the swivel wheel, press the button and To pull the wheel out of the axle opening. Folding (9)  IMPORTANT: The swivel wheel must be in a swivelling position before folding (1). €¢  IMPORTANT: Always remove the Quinny Dreami carrycot or Maxi-Cosi car safety seat before folding. €¢  Apply the brake on the Quinny Speedi (see Using the parking brake). €¢  Make sure the footrest is in the lowest position (see Footrest). (13) P  ush down the handlebar until the stop, and then further downwards until you hear a clearly definite “click”. [. . . ] (27)  IMPORTANT: The press studs on the side of the seat are for attaching a footmuff only. Bumper bar (28)  Place the bumper bar adapter (‘R’ on the right side and ‘L’ on the left) on the spring-loaded button. Next, press in the spring-loaded button using the adapter while at the same time sliding the adapter downwards until you hear a ‘click’. (29)  ‘Click’ the bumper bar into the openings on the adapter. [. . . ]