User manual QUANTUM SNC 6101 4.60.03 RELEASE NOTES 04-2005

[. . . ] Release Notes Product: SNC 6101® Firmware 4. 60. 03 Date: April 2005 Contents Page 1 1 4 Topic Purpose of this Release Resolved Issues Documentation Purpose of this Release This release extends the capabilities of SNC 6101. These release notes list corrections to problems that were encountered in previous releases of SNC 6101. [. . . ] Maintenance Out - shutdown notice command successful, but responds with invalid CDB. Change method for delaying enabling of FC target mode port transmitters. CFL - If no memory for playback, copy buffer then print the error message. perror openDir message during initializeBox command; some config files not deleted. CFL does not display all information for a check condition (02); results from XCOPY command sent via tool. CFL SNC 6101, with detail enabled, READ command shows actual xfer equal to zero. The vpsMapClear command does not clear the mapping assignments for the host. "Failed to open tape: errno - 0x380003" during initializeBox command. SCSI - SNC 6101 Inquiry failure (12h). 2 © April 2005, ADIC Change Request Number 15314 Description CLI command hpFeatureDisable causes invalid block in partition errors. 4. 60. 01 35173 34740 34679 34566 34426 34221 34194 33216 33190 33042 32906 32491 32489 32413 32371 29621 29185 29114 24906 17979 15747 15063 12753 The CFL function failed and the SNC hung when the dateSetFromRTC command was used to set the real time clock. The CFL function was not recording "mode select" or "mode sense" SCSI commands when processing reserve and release functions. Command Flow Logging (CFL) failed to write sequence event 1, which resulted in an incorrect start time and a missing event. Change text "minutes" to "events" in clLogEventPlayback error response. [. . . ] CLI command mapMultipathSet requires an SNC reboot for changes to take effect. Private Target Mode fails because it PLOGIs the directory server. © April 2005, ADIC 3 Documentation The following documents are currently available for the SNC 6101: Document Number 6-00667-05 6-00701-03 6-00676-03 6-00064-06 Scalar 100 User's Guide SNC 6101 Installation and Maintenance Guide SNC Firmware 4 User's Guide ADIC Management Console User's Guide Document Title 4 © April 2005, ADIC [. . . ]